D-Link DES-3828 Product Manual - Page 395
config pim cbsr, DES-3800:admin#config pim cbsr ipif Trinity priority 4
UPC - 790069276811
View all D-Link DES-3828 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 395 highlights
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Group 224.0.0.1/4 Interface Trinity DES-3800:admin# config pim cbsr Purpose Syntax Description Parameters Restrictions Used to configure the settings for the Candidate Bootstrap Router and the priority of the selected IP interface to become the Boot Strap Router (BSR) for the PIM-SM network domain. config pim cbsr [ipif {priority [-1 | value 0-255>]} | hash_masklen | bootstrap_period ] This command will configure the settings for the Candidate BSR. The Boot Strap Router holds the information which determines which router on the network is to be elected as the RP for the multicast group and then to distribute RP information to other PIM-SM enabled routers. This command is for PIM-SM configurations only. ipif - Enter the ipif name of the interface to become the CBSR. priority [-1 | value 0-255>] - Used to state the Priority of this IP Interface to become the BSR. The user may select a priority between -1 to 255. An entry of -1 states that the interface will be disabled to be the BSR. hash_masklen Enter a hash mask length, which will be used with the IP address of the candidate RP and the multicast group address, to calculate the hash algorithm used by the router to determine which CRP on the PIM-SM enabled network will be the RP. The user may select a length between 0 -32 with a default setting of 30. This parameter must be configured separately from the ipif settings of this command. See the examples below for a better understanding. bootstrap_period - Enter a time period between 1-255 to determine the interval the Switch will send out Boot Strap Messages (BSM) to the PIM enabled network. The default setting is 60 seconds. This parameter must be configured separately from the ipif settings of this command. See the examples below for a better understanding. Only Administrator or Operator-level users can issue this command. Usage example: To configure the settings for an IP interface to become a CBSR on the multiple access network: DES-3800:admin#config pim cbsr ipif Trinity priority 4 Command: config pim cbsr ipif Trinity priority 4 Success. DES-3800:admin# Usage example: To configure the hash mask length for the CBSR: DES-3800:admin#config pim cbsr hash_masklen 30 Command: config pim cbsr hash_masklen 30 Success. Usage example: DES-3800:admin# 391