D-Link DES-3828 Product Manual - Page 436

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual 63 MULTICAST VLAN COMMANDS The Multicast Vlan commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command Parameters create igmp_snooping multicast_vlan config igmp_snooping multicast_vlan {member_port | source_port | state [enable | disable] {force_agree} } delete igmp_snooping multicat_vlan show igmp_snooping multicast_vlan {} Each command is listed, in detail, in the following sections. create igmp_snooping multicast_vlan Purpose Syntax Description Parameters Restrictions Used to create a multicast VLAN. create igmp_snooping multicast_vlan . The create igmp_snooping multicast_vlan command will create a multicast_vlan. Multiple multicast VLAN can be configured. vlan_name - The name of the multicast VLAN to be created, Each multicast VLAN is given a name that can be up to 32 characters. vlanid - The VLAN ID of the multicast VLAN to be created. The range is 2 - 4094. Only Administrator or Operator-level users can issue this command. The ISM VLAN being created can not exist in the 1Q VLAN database. Multiple ISM VLAN can be created. The ISM VLAN snooping function co-exist with the 1Q VLAN snooping function. Example usage: To create igmp_snoop multicast_vlan mv1 2: DES-3800:admin# create igmp_snoop multicast_vlan mv1 2 Command: create igmp_snoop multicast_vlan mv1 2 Success. DES-3800:admin# 432