D-Link DES-3828 Product Manual - Page 54
Network Management Commands, Version, Authentication, Method, Description
UPC - 790069276811
View all D-Link DES-3828 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual 8 NETWORK MANAGEMENT COMMANDS The network management commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. The xStack DES-3800 Switch Series supports the Simple Network Management Protocol (SNMP) versions 1, 2c, and 3. After enabling SNMP, you can specify which version of SNMP you want to use to monitor and control the Switch. three versions of SNMP vary in the level of security provided between the management station and the network device. The following table lists the security features of the three SNMP versions: SNMP Version v1 v2c v3 v3 v3 Authentication Method Description Community String Community String is used for authentication − NoAuthNoPriv Community String Community String is used for authentication − NoAuthNoPriv Username Username is used for authentication − NoAuthNoPriv MD5 or SHA Authentication is based on the HMAC-MD5 or HMAC-SHA algorithms − AuthNoPriv MD5 DES or SHA DES Authentication is based on the HMAC-MD5 or HMAC-SHA algorithms − AuthPriv. DES 56-bit encryption is added based on the CBC-DES (DES-56) standard The SNMP commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command Parameters create trusted_host | network delete trusted_host | network | all show trusted_host enable snmp traps enable snmp authenticate traps show snmp traps disable snmp traps disable snmp authenticate traps config snmp system_contact config snmp system_location config snmp system_name enable rmon disable rmon enable snmp disable snmp Each command is listed, in detail, in the following sections. 50