D-Link DES-3828 Product Manual - Page 55

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual create trusted_host Purpose Syntax Description Parameters Restrictions Used to create the trusted host. create trusted_host | network The create trusted_host command creates the trusted host. The Switch allows specification of up to three IP addresses or networks that are allowed to manage the Switch via in-band SNMP, Web or TELNET based management software. These IP addresses must be members of the Management VLAN. If no IP addresses are specified, then there is nothing to prevent any IP address from accessing the Switch, provided the user knows the Username and Password. − The IP address of the trusted host to be created. network − The network address of the trusted network. The form of the network address is xxx.xxx.xxx.xxx/y. Only Administrator or Operator-level users can issue this command. Example usage: To create the trusted host: DES-3800:admin#create trusted_host 10.48.74.121 Command: create trusted_host 10.48.74.121 Success. DES-3800:admin# delete trusted_host Purpose Used to delete a trusted host entry made using the create trusted_host command above. Syntax | network | all Description This command is used to delete a trusted host entry made using the create trusted_host command above. Parameters − The IP address of the trusted host. network − The network address of the trusted network. The form of the network address is xxx.xxx.xxx.xxx/y. all- Specifies that all trusted host entries should be deleted. Restrictions Only Administrator or Operator-level users can issue this command. Example Usage: To delete a trusted host with an IP address 10.48.74.121: DES-3800:admin#delete trusted_host 10.48.74.121 Command: delete trusted_host 10.48.74.121 Success. DES-3800:admin# 51