D-Link DES-3828 Product Manual - Page 97
config traffic control_trap
UPC - 790069276811
View all D-Link DES-3828 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config traffic control_trap Purpose Syntax Description Parameters Restrictions Used to configure the trap settings for the packet storm control mechanism. config traffic control_trap [none | storm_occurred | storm_cleared | both] This command will configure how packet storm control trap messages will be used when a packet storm is detected by the Switch. This function can only be used for the software traffic storm control mechanism (when the action field in the config traffic storm_control command is set as shutdown). none - No notification will be generated or sent when a packet storm control is detected by the Switch. storm _occurred - A notification will be generated and sent when a packet storm has been detected by the Switch. storm_cleared - A notification will be generated and sent when a packet storm has been cleared by the Switch. both - A notification will be generated and sent when a packet storm has been detected and cleared by the Switch. Only Administrator or Operator-level users can issue this command. Example usage: To configure notifications to be sent when a packet storm control has been detected and cleared by the Switch. DES-3800:admin# config traffic control_trap both Command: config traffic control_trap both Success. DES-3800:admin# 93