D-Link DES-5024 Product Manual

D-Link DES-5024 - Switch Manual

Get D-Link DES-5024 - Switch PDF manuals and user guides
UPC - 790069216008
View all D-Link DES-5024 manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DES-5024 manual content summary:

  • D-Link DES-5024 | Product Manual - Page 1
    DES-5024 Fast Ethernet Switching System User's Guide Rev. 01 (January, 1999) 651DES32.K15 Printed In Taiwan RECYCLABLE i
  • D-Link DES-5024 | Product Manual - Page 2
    materials, under normal use and service, for the following periods measured from date of purchase from D-Link or its authorized Reseller: Product returned to a D-Link office within ninety (90) days of purchase. A list of DLink offices is provided at the back of this manual, together with a copy
  • D-Link DES-5024 | Product Manual - Page 3
    the back of this manual, must be sent to a D-Link office. To obtain an RMA number for warranty service as to a hardware product, or to obtain warranty service as to a software product, contact the D-Link office nearest to you. D-Link Offices to Contact for Warranty Service: To mail your Registration
  • D-Link DES-5024 | Product Manual - Page 4
    such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems Inc., as stipulated by the United States Copyright Act if not installed and used in accordance with this user's guide, may cause harmful interference to radio communications. Operation of
  • D-Link DES-5024 | Product Manual - Page 5
    Aerosolreiniger. Am besten dient ein angefeuchtetes Tuch zur Reinigung. Um eine Beschädigung des Gerätes zu vermeiden sollten Sie nur Zubehörteile verwenden, die vom Hersteller Wenden Sie sich mit allen Fragen die Service und Repartur betreffen an Ihren Servicepartner. Somit stellen
  • D-Link DES-5024 | Product Manual - Page 6
    This Guide...1 Audience...1 Organization...1 1...2 Introduction...2 Features...2 Front Panel...4 Rear Panel ...5 Management Methods 6 Local Console Management 6 Telnet Management 6 D-View/ SNMP Management 6 RMON ...6 Updating Firmware ...6 2...7 Installing the DES-5024 7 Unpacking the DES-5024
  • D-Link DES-5024 | Product Manual - Page 7
    Module 26 2-Port 100BASE-FX Module 27 1-Port 1000BASE-SX Module 29 5...30 Managing the DES-5024 30 Local Console Management 31 Telnet...32 Log In ...33 Help Message...34 Panel Conventions...35 Console Program...36 System Configuration 36 User Account Management 36 Switch Port 1-8, 9-16, 17-24
  • D-Link DES-5024 | Product Manual - Page 8
    Menu 67 Create New VLAN 68 Delete VLAN Menu 70 Trunking Port Management Menu 72 Create New Trunking Port 73 Delete Trunking Port 75 6...77 Troubleshooting ...77 Appendix A...80 DES-5024 Technical Specifications 80 Switch Specifications 80 Port Specifications 80 Index...84 viii
  • D-Link DES-5024 | Product Manual - Page 9
    the contents of each chapter. It describes the features of the D-Link DES-5024 Fast Ethernet Switching System. Information about the DES-5024 and other D-Link products is available on our web site at www.dlink.com. Audience This user guide is intended for the networking or computer technician who is
  • D-Link DES-5024 | Product Manual - Page 10
    - FX, and 1-Port 1000BASE-SX module. • The DES-5024 can be configured and customized to your network. • The DES-5024 can be managed in three ways: Local Console Management, Telnet and SNMP. • Supports Cut-through and Store-and-Forward switching. • Supports Full and Half Duplex for both 10 Mbps and
  • D-Link DES-5024 | Product Manual - Page 11
    Fast Ethernet Switching System User's Guide • Modular chassis that accepts RJ-45, fiber optic and gigabit expansion modules • Support for RMON statistics through SNMP software. • The 1000BASE-SX port supports flow control compliant with IEEE 802.3 standard. Introduction 3
  • D-Link DES-5024 | Product Manual - Page 12
    Fast Ethernet Switching System User's Guide Front Panel The DES-5024 is designed for management at a glance. The front of the DES-5024, displayed in Figure 1, has LEDs that give you essential information at a glance. The DES-5024 is a modular unit. The chassis has five slots. All the modules have
  • D-Link DES-5024 | Product Manual - Page 13
    Fast Ethernet Switching System User's Guide Rear Panel The three pronged power plug, ventilation fan and the on/off switch are located at the rear of the DES-5024 displayed in Figure 2. The DES-5024 will work with AC in the range 100-240 VAC, 50-60 Hz. The power requirements are indicated on the
  • D-Link DES-5024 | Product Manual - Page 14
    Switching System User's Guide Management Methods The DES-5024 supports three management methods: • Local Console Management • Telnet Management • D-View/ SNMP Management Local Console Management Local Console Management is done through the RS-232 Console port. Managing the DES-5024 in this mode
  • D-Link DES-5024 | Product Manual - Page 15
    DCE serial cable • Two mounting brackets and eight screws • Four rubber pads with adhesive backing • One six foot (1.82 m) power cord • DES-5024 User's Guide CD ROM, DES-32/50 V.01 5.25/625M, part # 651DES32.K15. • Registration Card If any items are missing, contact the retailer where you purchased
  • D-Link DES-5024 | Product Manual - Page 16
    Fast Ethernet Switching System User's Guide Installation Options There are two options for installing the DES-5024: desktop/ shelf installation or rack installation. Follow these guidelines for desktop/ shelf installation or rack installation: • The surface must support 18 lbs or 8 kg. • The power
  • D-Link DES-5024 | Product Manual - Page 17
    Switching System User's Guide Desktop/ Shelf Installation The dimensions of the DES-5024 are 17.362 inches (441 mm) x 10.393 inches (264 mm) x 4.645 inches (118 mm). These measurements include the 8-mm rubber feet provided with the DES-5024. Follow these steps to install the DES-5024 on a desktop or
  • D-Link DES-5024 | Product Manual - Page 18
    Fast Ethernet Switching System User's Guide Figure 4: Attach Feet Installing the DES-5024 10
  • D-Link DES-5024 | Product Manual - Page 19
    Fast Ethernet Switching System User's Guide Rack Installation The DES-5024 can be mounted in an EIA standard size, 19-inch rack. The dimensions of the DES-5024 are 17.362 inches (441 mm) x 10.393 inches (264 mm) x 4.33 inches (110 mm). The DES-5024 can be placed in a wiring closet along with other
  • D-Link DES-5024 | Product Manual - Page 20
    Fast Ethernet Switching System User's Guide Figure 5: Attach Mounting Brackets Installing the DES-5024 12
  • D-Link DES-5024 | Product Manual - Page 21
    Fast Ethernet Switching System User's Guide Figure 6: Insert into Rack Installing the DES-5024 13
  • D-Link DES-5024 | Product Manual - Page 22
    module by inserting it into the guide, see Figure 8, and sliding it DES-5024 will auto detect the optional module. 6. Remove the dust cover from the transceiver and plug the cable in. 7. Check the LEDs to verify that there is a link and a proper connection at the port. See the Troubleshooting
  • D-Link DES-5024 | Product Manual - Page 23
    Fast Ethernet Switching System User's Guide Figure 7: Remove Blank Bracket Installing the DES-5024 15
  • D-Link DES-5024 | Product Manual - Page 24
    Fast Ethernet Switching System User's Guide Figure 8: Insert Optional Module Installing the DES-5024 16
  • D-Link DES-5024 | Product Manual - Page 25
    all ports will auto negotiate the proper speed and duplex mode when the DES-5024 is powered on. Reboot the DES-5024 if there is a problem. Contact D-Link Systems, Inc. for technical support. Check the configuration of the DES-5024 after a power failure but do not reset unless it is necessary. The
  • D-Link DES-5024 | Product Manual - Page 26
    Guide 3 Connecting the DES-5024 to the Network This chapter covers the following: • Cable Specifications • Ports • Connecting the DES-5024 to another DES-5024 • Connecting the DES-5024 to other switches and hubs This section deals with making cables and connecting the DES-5024 not support problem
  • D-Link DES-5024 | Product Manual - Page 27
    System User's Guide Table 1: Cable Specifications for Copper Connection Ethernet Type 10BASE-T 100BASE-TX Cable Requirements Category 3, 4, or 5 UTP or STP Category 5 UTP or STP Maximum Length 328 ft (100 M) 328 ft (100 M) Figure 9: Cable Diagram Connecting the DES-5024 to the Network
  • D-Link DES-5024 | Product Manual - Page 28
    Fast Ethernet Switching System User's Guide Fiber Optic Cable Data can travel much farther over fiber optic cable than over Category 3, 4 or 5 cable. Cable length specified cable: • 62.5 um cable 720 feet (220 meters) • 50 um cables 1639 feet (500 meters) Connecting the DES-5024 to the Network 20
  • D-Link DES-5024 | Product Manual - Page 29
    Mbps. Contact D-Link, Inc. sales to purchase any of the modules. Refer to Chapter 3, Installing Optional Modules, for installation instructions. Refer to Chapter 3, Cable Specifications, for information on cable types and connectors. RS-232 Port Follow these steps to connect the DES-5024 and another
  • D-Link DES-5024 | Product Manual - Page 30
    User's Guide DES-5024 to DES-5024 Connection Connect two DES-5024s together through one or more MDI-X ports. See the section on Port Trunking in Chapter 5 for instructions on how to configure trunked ports. Connecting the DES-5024 to other Switches and Hubs You can connect the DES-5024 to other
  • D-Link DES-5024 | Product Manual - Page 31
    Fast Ethernet Switching System User's Guide 4 LEDs The LED panel of the DES-5024, is designed to allow you to manage the DES-5024 at a glance. The LEDs indicate the following: • Power • Status • Diagnostic • Utilization • Link • Speed • Duplex mode • Collision • Receiving • Transmitting All LEDs
  • D-Link DES-5024 | Product Manual - Page 32
    during normal operation. Diagnostic The Diagnostic LED is used to diagnose any problem on the DES-5024. If any part of the DES-5024 fails the POST or if a problem occurs the Diagnostic LED displays a code indicating the problem. See Chapter 6 for the meaning of the LED code and a recommended action
  • D-Link DES-5024 | Product Manual - Page 33
    during the POST or during operation Displays the utilization of the DES-5024. LED increments left to right, higher numbers indicate greater utilization. Dark Normal if firmware is not being loaded Normal if there are no problems. See Chapter 6 for a chart showing the meaning of the Diagnostic LED
  • D-Link DES-5024 | Product Manual - Page 34
    the port. If a cable is plugged into the port and the Link LED is off, check the cable and connection. The default value is that all ports auto-negotiate the proper speed and duplex mode. If the port has been manually configured for a particular speed and duplex mode, verify that the speed
  • D-Link DES-5024 | Product Manual - Page 35
    User's Guide 2-Port 100BASE-FX Module Link Transmitting link at the port. Dx Dx means duplex mode. The Dx LED indicates the port's duplex mode. The LED is lit when the port is in full duplex and dark when the port is in half duplex. The default mode is half duplex. The ports can be manually
  • D-Link DES-5024 | Product Manual - Page 36
    Fast Ethernet Switching System User's Guide Table 5: FX Module LED LED Lit Lk (Link) (Green) Port is linked to another device Dx (Duplex mode) (Green) Tx (Transmitting) (Green) Port is in full duplex Port is transmitting data Rx (Receiving) (Green) Col (collisions) (Amber)
  • D-Link DES-5024 | Product Manual - Page 37
    Fast Ethernet Switching System User's Guide 1-Port 1000BASE-SX Module Act Link 1000BASE-SX Switched ports module Figure 14: 1-Port 1000BASE-SX Module The gigabit expansion module, displayed in Figure 14, has one port. Link The link LED lights to indicate there is a link at the port. Act
  • D-Link DES-5024 | Product Manual - Page 38
    Switching System User's Guide 5 Managing the DES-5024 This chapter shows the menus used to manage the DES-5024. Three types of management are available on the DES-5024: • Local Console Management (out-of-band) • Telnet Management (in-band) • D-View/ SNMP Management The DES-5024 can be managed in
  • D-Link DES-5024 | Product Manual - Page 39
    Ethernet Switching System User's Guide Local Console Management Local Console Management is always done through the RS-232 serial port and requires a direct connection between the DES-5024 and a PC. This type of management is very useful when the network is down and the DES-5024 cannot be reached by
  • D-Link DES-5024 | Product Manual - Page 40
    Fast Ethernet Switching System User's Guide Telnet You can manage the DES-5024 via Telnet session. However, first you must assign a unique IP address to the DES-5024. Use Local Console Management to log into the DES5024 for the first time so that you can assign an IP address. Once you have assigned
  • D-Link DES-5024 | Product Manual - Page 41
    Guide Log In The Log In panel, displayed in Figure 15, is the first panel you see when connecting to the DES-5024. All management methods require you to log into the DES-5024 . Figure 15: Login Follow these steps to log into the DES-5024 for the first time: Enter the default User Name and Password
  • D-Link DES-5024 | Product Manual - Page 42
    Fast Ethernet Switching System User's Guide Help Message A one page panel, displayed in Figure 16, is available. The menu lists the keystroke and typographic conventions available on the DES-5024. Figure 16: Help Message Managing the DES-5024 34
  • D-Link DES-5024 | Product Manual - Page 43
    Fast Ethernet Switching System User's Guide Panel Conventions Keystroke Conventions Example Description UP, DOWN, or TAB keys Select different items. SPACEBAR Toggle-switch. . After you are finished viewing the help panel, press Enter to return to the main menu. Managing the DES-5024 35
  • D-Link DES-5024 | Product Manual - Page 44
    Fast Ethernet Switching System User's Guide Console Program The Console Program, shown in Figure 17, is the main menu of the DES-5024. Figure 17: Console Program System Configuration The System Configuration menu gives you general information about the DES-5024 and allows you to assign a LAN IP
  • D-Link DES-5024 | Product Manual - Page 45
    Fast Ethernet Switching System User's Guide 100BASE-FX/ 1000BASE-SX Switch Port Module Allows you to configure the ports on the expansion module. You can set the duplex to select a menu: 1. Use the tab key or the up and down arrow keys to select an option. 2. Press Enter. Managing the DES-5024 37
  • D-Link DES-5024 | Product Manual - Page 46
    Fast Ethernet Switching System User's Guide System Configuration Menu The System Configuration menu, displayed in Figure 18, allows you to change the configuration of the DES-5024. Figure 18: System Configuration menu System Information The System Information menu displays the Hardware revision,
  • D-Link DES-5024 | Product Manual - Page 47
    Fast Ethernet Switching System User's Guide Software Update The Software Update menu is used to update the software on the DES-5024. This feature is only supported through Local Console Management. Follow these steps to select a menu: 1. Highlight the menu option. 2. Press Enter. System Information
  • D-Link DES-5024 | Product Manual - Page 48
    Ethernet Switching System User's Guide MAC Address Specifies the hardwired address of the DES-5024. This address cannot be changed. System Description Brief manufacturer description of the DES-5024. This value cannot be changed. System Name Specifies the full name of the DES-5024. This value can be
  • D-Link DES-5024 | Product Manual - Page 49
    Fast Ethernet Switching System User's Guide System Reset The System Reset panel, displayed in Figure 20, enables you to reset the DES-5024 without powering off. Figure 20: System Reset Some configurations will require you to reset the DES-5024 in order for them to take effect. Screen prompts will
  • D-Link DES-5024 | Product Manual - Page 50
    Fast Ethernet Switching System User's Guide Factory Reset The Factory Reset panel, displayed in Figure 21, is used to reset the DES-5024 and restore all factory default values. Using this panel erases all configurations and customization. Figure 21: Factory Reset Follow these steps to restore
  • D-Link DES-5024 | Product Manual - Page 51
    Fast Ethernet Switching System User's Guide Figure 22: Factory Reset confirmation Follow these steps to exit the panel without restoring factory default parameters: 1. Select No or Exit. 2. Press Enter. Managing the DES-5024 43
  • D-Link DES-5024 | Product Manual - Page 52
    Fast Ethernet Switching System User's Guide System Rate Control The System Rate Control panel, displayed in Figure 23, allows you to set the packet forwarding rate on the DES-5024. There are two options: Store & Forward and CutThrough. Figure 23: System Rate Control The DES-5024 can be set for
  • D-Link DES-5024 | Product Manual - Page 53
    Fast Ethernet Switching System User's Guide example, 1500 byte packets are delayed by 1200 microseconds in a Store and Forward device versus 60 microseconds in a Cut-Through device. Store and Forward requires more memory because the DES-5024 must store the packet before sending it out. Advantages of
  • D-Link DES-5024 | Product Manual - Page 54
    Fast Ethernet Switching System User's Guide Software Update Menu The Software Update menu, displayed in Figure 24, is used to upgrade the software on the DES-5024. Figure 24: Software Update menu Follow these steps to upload new software: 1. Load the new software to the hard drive of the PC you
  • D-Link DES-5024 | Product Manual - Page 55
    Fast Ethernet Switching System User's Guide Figure 25: Transfer Firmware Figure 26: Send File Managing the DES-5024 47
  • D-Link DES-5024 | Product Manual - Page 56
    Fast Ethernet Switching System User's Guide Figure 27: Xmodem When the transfer is complete you will see the panel in Figure 28. The DES-5024 will reset itself automatically and you will have to log in again. Figure 28: EEPROM Managing the DES-5024 48
  • D-Link DES-5024 | Product Manual - Page 57
    Fast Ethernet Switching System User's Guide User Account Management The User Account Management panels allow you to add users, delete users and modify user . Figure 29: User Account Change Follow these steps to select a menu option: 1. Select an option. 2. Press Enter. Managing the DES-5024 49
  • D-Link DES-5024 | Product Manual - Page 58
    Fast Ethernet Switching System User's Guide Create New User The Create New User panel, displayed in Figure 30, allows you to add new users. You can have a total of three users on the DES-5024. Figure 30: Create New User User Name Enter the user's name in this field. User names are case sensitive
  • D-Link DES-5024 | Product Manual - Page 59
    Ethernet Switching System User's Guide Follow these steps to add users: 1. Enter the User Name. 2. Enter the Password. 3. Reenter the password in the Confirm Password field. 4. Toggle the space bar to set the access level of the new user. 5. Select Save and press Enter. Managing the DES-5024 51
  • D-Link DES-5024 | Product Manual - Page 60
    Fast Ethernet Switching System User's Guide Delete Users The Delete Users panel, displayed in Figure 31, allows you to delete users from the DES5024. As a safety precaution, the DES-5024 will not allow the user who is currently logged in to delete themselves by accident. Figure 31: Delete Users
  • D-Link DES-5024 | Product Manual - Page 61
    Fast Ethernet Switching System User's Guide 2. Toggle the space bar to change the current Access Level. 3. Select Save and press Enter. Follow these steps to change user the space bar to toggle the option from No to Yes. 3. Press Enter. 4. Select Save and press Enter. Managing the DES-5024 53
  • D-Link DES-5024 | Product Manual - Page 62
    Fast Ethernet Switching System User's Guide Change Password The Change Password panel, displayed in Figure 32, enables you to change user passwords. Figure 32: Enter the new password in the New Password field. 4. Reenter the new password in the Confirm Password field. Managing the DES-5024 54
  • D-Link DES-5024 | Product Manual - Page 63
    Fast Ethernet Switching System User's Guide 5. Select Save and press Enter to save your changes. Managing the DES-5024 55
  • D-Link DES-5024 | Product Manual - Page 64
    Fast Ethernet Switching System User's Guide Switch Port Configuration The Switch Port Configuration panels are used to configure individual which group of ports you would like to work with. 2. Select the group on the Console Program panel. 3. Press Enter to go to the appropriate panel. Managing the
  • D-Link DES-5024 | Product Manual - Page 65
    Fast Ethernet Switching System User's Guide Switch Port Configuration Menu The Switch to use a disabled port. Physical Refers to the physical state of the port. If you manually change the state of a port it will remain in that state until you change it. It Mbps full duplex. Managing the DES-5024 57
  • D-Link DES-5024 | Product Manual - Page 66
    's Guide Ports port can only be in 1000SX/Full. Half-duplex operation is not supported in the Gigabit Module. Port State All ports have four states: learning the MAC address for data packets. This setting cannot be manually changed. Priority The port priority can be set from zero to 255 DES-5024 58
  • D-Link DES-5024 | Product Manual - Page 67
    Guide Spanning Tree Configuration The Spanning Tree Configuration panel is used to configure the Spanning Tree Algorithm. The Spanning Tree Algorithm (STA) in the DES-5024 network. These backup paths are idle until the DES-5024 determines that a problem has developed in the primary path. If the
  • D-Link DES-5024 | Product Manual - Page 68
    's Guide Spanning Tree Algorithm Spanning Tree Algorithm can be enabled or disabled. Use Spanning Tree to prevent network loops. Bridge Priority The Bridge Priority can be from 0 to 65535. Zero is the highest Bridge Priority. The higher the Bridge Priority the greater the chance that the DES-5024
  • D-Link DES-5024 | Product Manual - Page 69
    Max Age Time Avoid low number for unnecessary reset of Root Bridge Max Age < 2 x (Forward Delay 1) Max Age > 2 x Hello Time + 1) Disable a port for security or problem isolation Managing the DES-5024 61
  • D-Link DES-5024 | Product Manual - Page 70
    Guide SNMP Management Configuration The SNMP Management Configuration panel is used to configure the DES-5024 for SNMP management. Leave the default values in place if you are not managing your network through SNMP. The DES-5024 network manager. The DES-5024 supports its own proprietary enterprise
  • D-Link DES-5024 | Product Manual - Page 71
    Fast Ethernet Switching System User's Guide SNMP Management Configuration Menu The SNMP Management Configuration menu, displayed in Figure 35, enables you to configure the DES-5024 for SNMP management. Figure 35: SNMP Management Configuration menu SNMP Manager Setting The fields under this setting
  • D-Link DES-5024 | Product Manual - Page 72
    Failure Signifies that an addressee (or manager/ user) on the DES-5024 is not a valid user of the DES-5024 and may have entered an incorrect community name. Link Change Event Signifies that the link of a port has changed from link up to link down or vice versa. IP Address This field is used to
  • D-Link DES-5024 | Product Manual - Page 73
    Fast Ethernet Switching System User's Guide 2. Select the Access Right field and toggle the space bar to select Read Only or Read/ Write. 3. Select the Status String. 3. Select Status and toggle the space bar to select Valid or Invalid. 4. Select Save and press Enter. Managing the DES-5024 65
  • D-Link DES-5024 | Product Manual - Page 74
    Fast Ethernet Switching System User's Guide VLAN Port Management A Virtual Local Area Network (VLAN) is a are not already on their own LAN segment. VLANs can be used to subdivide the network. The DES-5024 supports port based VLAN. Port based VLAN means that the VLAN is grouped by port. If a VLAN
  • D-Link DES-5024 | Product Manual - Page 75
    Fast Ethernet Switching System User's Guide VLAN Port Management Menu The VLAN Port Management menu, displayed in Figure 36, enables you to create, delete and modify VLANs on the DES-5024. Figure 36: VLAN Port Management menu Follow these steps to create, delete and modify VLAN: 1. Select the
  • D-Link DES-5024 | Product Manual - Page 76
    Fast Ethernet Switching System User's Guide Create New VLAN The Create New VLAN menu, displayed unique name. Port # Is the number of the port. The numbers on the panel match the ports on the DES-5024. Some ports are combined. For example, ports 5 and 9 are shown as "Port 5/9". Ports that are grouped
  • D-Link DES-5024 | Product Manual - Page 77
    Fast Ethernet Switching System User's Guide VLAN. All ports will have a status of available on this panel, even after they have been selected as part of a VLAN. VLAN and toggle the space bar to change the status from Available to Selected. 3. Select Save and press Enter. Managing the DES-5024 69
  • D-Link DES-5024 | Product Manual - Page 78
    Fast Ethernet Switching System User's Guide Delete VLAN Menu The Delete VLAN menu, displayed in Figure 38, is used to delete VLANs. the VLAN. 3. Select Save and press Enter. 4. A screen prompt will warn you that you must reset the DES-5024 in order for the change to take effect. Managing the
  • D-Link DES-5024 | Product Manual - Page 79
    Fast Ethernet Switching System User's Guide Modify VLAN Menu The Modify VLAN menu, displayed in Figure 39, enables you to modify VLANs. Figure 39: Modify VLAN means the port has been selected as part of a VLAN. 5. Select Save and press Enter to implement your changes. Managing the DES-5024 71
  • D-Link DES-5024 | Product Manual - Page 80
    Fast Ethernet Switching System User's Guide Trunking Port Management Menu The Trunking Port Management panels, displayed in Figure 40, are used to create, delete Follow these steps to create, delete and modify trunk ports: 1. Select the appropriate option. 2. Press Enter. Managing the DES-5024 72
  • D-Link DES-5024 | Product Manual - Page 81
    Fast Ethernet Switching System User's Guide Create New Trunking Port The Create New Trunking Port a name. Port # Is the number of the port. The numbers on the panel match the ports on the DES-5024. Some ports are not available for trunking. For example, port 5 has a status of N/A. Ports that are
  • D-Link DES-5024 | Product Manual - Page 82
    Fast Ethernet Switching System User's Guide a TrunkGroup. All ports will have a status of available on this panel, even after they have been selected as part of a and toggle the space bar to change the status from Available to Selected. 3. Select Save and press Enter. Managing the DES-5024 74
  • D-Link DES-5024 | Product Manual - Page 83
    Fast Ethernet Switching System User's Guide Delete Trunking Port The Delete Trunking Port panel, displayed in Figure 42, is used to delete Trunk Ports. Modify Trunking Port The Modify Trunking Port panel, displayed in Figure 43, enables you to Modify Trunking Ports. Managing the DES-5024 75
  • D-Link DES-5024 | Product Manual - Page 84
    Fast Ethernet Switching System User's Guide Figure 43: Modify Trunking Port Trunking Port Name The names of all Trunked Ports appear in this column. Follow are not available for inclusion in any trunking group. 5. Select Save and press Enter to implement your changes. Managing the DES-5024 76
  • D-Link DES-5024 | Product Manual - Page 85
    This troubleshooting section is intended to help you solve the most common problems on the DES-5024. The Diagnostic LED displays a code if there is a problem on the DES-5024. If an error cannot be resolved by implementing the solutions in this section, contact D-Link Technical Support. All
  • D-Link DES-5024 | Product Manual - Page 86
    it on again. Use the monitor to check the error messages. Return the DES-5024 to D-Link for service if the problem persists. Forget Password If you forget your password, contact D-Link Technical Support at (949) 788-0805 for assistance or check our web site at www.dlink.com. Troubleshooting 78
  • D-Link DES-5024 | Product Manual - Page 87
    Fast Ethernet Switching System User's Guide 2 Table 8: Diagnostic LED PHY Failure ARL Failure ARL Memory Failure Troubleshooting 79
  • D-Link DES-5024 | Product Manual - Page 88
    Fast Ethernet Switching System Users' Guide Appendix A DES-5024 Technical Specifications Switch Specifications • Complies with and Store-and-Forward switching for reliable error-free packet transfers • Native SNMP management support with Ethernet MIB II (RFC 1213) and bridge MIB (RFC 1493), RMON MIB
  • D-Link DES-5024 | Product Manual - Page 89
    Fast Ethernet Switching System User's Guide • 1 1000BASE-SX port, operates at full duplex and requires 850 nm multimode fiber optic cables with SC connectors. This port can also negotiate flow control.
  • D-Link DES-5024 | Product Manual - Page 90
    Fast Ethernet Switching System Users' Guide Physical and Environmental AC inputs: 90 - 254 VAC, 50/60 Hz (internal universal power supply) Power Consumption: 105 watts maximum DC fans: 2 built in 80 x
  • D-Link DES-5024 | Product Manual - Page 91
    Fast Ethernet Switching System User's Guide Performance Transmission Method: Cut-Through and Store-and-Forward RAM Buffer: 2 M bytes per device Filtering Address Table: Packet Filtering/ Forwarding Rate: MAC Address Learning: 8 K entries
  • D-Link DES-5024 | Product Manual - Page 92
    Delete Users 52 Delete VLAN 70 DES-5024 to DES-5024 connection 22 diagnostic 24 Diagnostic LED DES-3216 7 Installation 8, 9, 11 Installing Modules 14 IP Address 64 L LAN Default Gateway 40 LAN IP Address 40 LAN Subnet Mask 40 LED Panel 24 Link 26, 29 Link Change 64 Lk 27 Local Console
  • D-Link DES-5024 | Product Manual - Page 93
    Ports 21 POST Errors 77 Power 17 Power LED 24, 77 Priority 58 R Rear Panel 5 RMON 6 Root Bridge 61 Root Cost 60 Root Port 61 Rx 27 S SNMP Community 63, 64 SNMP Management 6, 37, 62, 63 SNMP Setting 63 SNMP Trap 64 Software Update 39, 46 Software Version 39 Spanning Tree 37 Spanning
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
i
DES-5024 Fast Ethernet Switching
System
User’s Guide
Rev. 01 (January, 1999)
651DES32.K15
Printed In Taiwan
RECYCLABLE