D-Link DFL-260 Product Manual - Page 198
Multicast Forwarding - Address Translation, 6.2. Multicast Forwarding with SAT
UPC - 790069296802
View all D-Link DFL-260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 198 highlights
4.6.2. Multicast Forwarding with SAT Multiplex Rules Chapter 4. Routing Figure 4.15. Multicast Forwarding - Address Translation This scenario is based on the previous scenario but this time the multicast group is translated. When the multicast streams 239.192.10.0/24 are forwarded through the if2 interface, the multicast groups should be translated into 237.192.10.0/24. No address translation should be made when forwarding through interface if1. The configuration of the corresponding IGMP rules can be found below in Section 4.6.3.2, "IGMP Rules Configuration Address Translation". Tip As previously noted, remember to add an Allow rule matching the SAT Multiplex rule. Example 4.13. Multicast Forwarding - Address Translation The following SAT Multiplex rule needs to be configured to match the scenario described above: Web Interface A. Create a custom service for multicast called multicast_service: 1. Go to Objects > Services > Add > TCP/UDP 2. Now enter: • Name: multicast_service • Type: UDP • Destination: 1234 B. Create an IP rule: 1. Go to Rules > IP Rules > Add > IP Rule 2. Under General enter. • Name: a name for the rule, for example Multicast_Multiplex 198