D-Link DFL-260 Product Manual - Page 41
CLI Scripts, sessionmanager - manual
UPC - 790069296802
View all D-Link DFL-260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
2.1.5. CLI Scripts Chapter 2. Management and Maintenance • Secure Copy (SCP) sessions. • Web Interface sessions connected by HTTP or HTTPS. The command without any options gives a summary of currently open sessions: gw-world:/> sessionmanager Session Manager status Active connections : 3 Maximum allowed connections : 64 Local idle session timeout : 900 NetCon idle session timeout : 600 To see a list of all sessions use the -list option. Below is some typical output showing the local console session: gw-world:/> sessionmanager -list User Database IP Type Mode Access local (none) 0.0.0.0 local console admin If the user has full administrator privileges, they can forcibly terminate another management session using the -disconnect option of the sessionmanager command. The sessionmanager command options are fully documented in the CLI Reference Guide. 2.1.5. CLI Scripts To allow the administrator to easily store and execute sets of CLI commands, NetDefendOS provides a feature called CLI scripting. A CLI script is a predefined sequence of CLI commands which can be executed after they are saved to a file and the file is then uploaded to the NetDefend Firewall. The steps for creating a CLI script are as follows: 1. Create a text file with a text editor containing a sequential list of CLI commands, one per line. The D-Link recommended convention is for these files to use the file extension .sgs (Security Gateway Script). The filename, including the extension, should not be more than 16 characters. 2. Upload the file to the NetDefend Firewall using Secure Copy (SCP). Script files must be stored in a directory under the root called /scripts. SCP uploading is discussed in detail in Section 2.1.6, "Secure Copy". 3. Use the CLI command script -execute to run the script file. The CLI script command is the tool used for script management and execution. The complete syntax of the command is described in the CLI Reference Guide and specific examples of usage are detailed in the following sections. See also Section 2.1.4, "The CLI" in this manual. Only Four Commands are Allowed in Scripts The commands allowed in a script file are limited to four and these are: add set 41