D-Link DFL-260 Product Manual - Page 519
Max SKIP Length, Max IPIP/FWZ Length, Max IPsec IPComp Length, Log Oversized Packets
UPC - 790069296802
View all D-Link DFL-260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 519 highlights
13.6. Length Limit Settings Chapter 13. Advanced Settings Specifies in bytes the maximum size of an AH packet. AH, Authentication Header, is used by IPsec where only authentication is applied. This value should be set at the size of the largest packet allowed to pass through the VPN connections, regardless of its original protocol, plus approx. 50 bytes. Default: 2000 Max SKIP Length Specifies in bytes the maximum size of a SKIP packet. Default: 2000 Max OSPF Length Specifies the maximum size of an OSPF packet. OSPF is a routing protocol mainly used in larger LANs. Default: 1480 Max IPIP/FWZ Length Specifies in bytes the maximum size of an IP-in-IP packet. IP-in-IP is used by Checkpoint Firewall-1 VPN connections when IPsec is not used. This value should be set at the size of the largest packet allowed to pass through the VPN connections, regardless of its original protocol, plus approx. 50 bytes. Default: 2000 Max IPsec IPComp Length Specifies in bytes the maximum size of an IPComp packet. Default: 2000 Max L2TP Length Specifies in bytes the maximum size of a Layer 2 Tunneling Protocol packet. Default: 2000 Max Other Length Specifies in bytes the maximum size of packets belonging to protocols that are not specified above. Default: 1480 Log Oversized Packets Specifies if NetDefendOS will log occurrences of oversized packets. Default: Enabled 519