D-Link DFL-260 Product Manual - Page 79
Ethernet Addresses, Ethernet Address, aa-bb-cc-dd-ee-ff
UPC - 790069296802
View all D-Link DFL-260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
3.1.3. Ethernet Addresses Chapter 3. Fundamentals This example adds a range of IP addresses from 192.168.10.16 to 192.168.10.21 and names the range wwwservers: Command-Line Interface gw-world:/> add Address IP4Address wwwservers Address=192.168.10.16-192.168.10.21 Web Interface 1. Go to Objects > Address Book > Add > IP address 2. Specify a suitable name for the IP Range, for example wwwservers. 3. Enter 192.168.10.16-192.168.10.21 as the IP Address 4. Click OK Example 3.4. Deleting an Address Object To delete an object named wwwsrv1 in the address book, do the following: Command-Line Interface gw-world:/> delete Address IP4Address wwwsrv1 Web Interface 1. Go to Objects > Address Book 2. Select the address object wwwsrv1 3. Choose Delete from the menu 4. Click OK Deleting In-use IP Objects If an IP object is deleted that is in use by another object then NetDefendOS will not allow the configuration to be deployed and will produce a warning message. In other words, it will appear that the object has been successfully deleted but NetDefendOS will not allow the configuration to be saved to the NetDefend Firewall. 3.1.3. Ethernet Addresses Ethernet Address objects are used to define symbolic names for Ethernet addresses (also known as MAC addresses). This is useful, for example, when populating the ARP table with static ARP entries, or for other parts of the configuration where symbolic names are preferred over numerical Ethernet addresses. When specifying an Ethernet address the format aa-bb-cc-dd-ee-ff should be used. Ethernet addresses are also displayed using this format. Example 3.5. Adding an Ethernet Address 79