D-Link DGE-530T Product Manual
D-Link DGE-530T Manual
 |
UPC - 790069251610
View all D-Link DGE-530T manuals
Add to My Manuals
Save this manual to your list of manuals |
D-Link DGE-530T manual content summary:
- D-Link DGE-530T | Product Manual - Page 1
- D-Link DGE-530T | Product Manual - Page 2
Link SNMP Agent 17 Installation 17 Configuration 20 SNMP Functions 24 Troubleshooting 26 Networking Basics 27 Check your IP address 27 Statically Assign an IP address 28 Technical Specifications 30 Contacting Technical Support 31 Warranty 32 Registration 37 D-Link DGE-530T User Manual - D-Link DGE-530T | Product Manual - Page 3
Section 1 - Product Overview PPraocdkuacgteOCvoenrtevnietsw • D-Link DGE-530T Gigabit Network Adapter • Drivers, Manual, and Warranty on CD System Requirements Before installing the DGE-530T, check your system for the following minimum configuration requirements. • An open PCI bus master slot, 32 - D-Link DGE-530T | Product Manual - Page 4
new, expensive fiber cables. Gigabit Ethernet uses your existing CAT-5 cabling while providing you with 10/100/1000Mbps network speed auto-sensing and full/half duplex auto-negotiation. Advanced Features and Security The DGE-530T supports SNMP for remote troubleshooting and management, ACPI for - D-Link DGE-530T | Product Manual - Page 5
DGE-530T Network Adapter provides the following: • Operability in 32-bit, 33 MHz slot servers and workstations • Universal Bus support 3.3V • Compliance with IEEE 802.3ab 1000BASE-T Gigabit Ethernet standards, IEEE 802.3u Fast Ethernet standards. • Plug-and-Play installation • Supports Wake-on-LAN - D-Link DGE-530T | Product Manual - Page 6
Section 1 - Product Overview Hardware Overview LEDs Four LED indicators: Link/Activity, Full Duplex, 1000Mbps, 100Mbps Ethernet Port 10/100/100 Ethernet Port. D-Link DGE-530T User Manual - D-Link DGE-530T | Product Manual - Page 7
Ethernet Adapter Card • DGE-530T Drivers and Manual on CD-ROM If any of these items are missing or damaged, please contact your local reseller for replacement. Driver Installation Turn on your computer and Insert the D-Link DGE-530T Driver CD in the CD-ROM drive. The step-by-step instructions - D-Link DGE-530T | Product Manual - Page 8
Section 2 - Installation The driver will install. Once the installation is complete, click OK to finish. D-Link DGE-530T User Manual - D-Link DGE-530T | Product Manual - Page 9
being installed. It provides optimal full-duplex 1000Mb/s Ethernet service over Category 5e links as defined by ANSI/TIA/EIA-568-A-5. Topology rules for 1000BASE-T are the same as those used for 100BASE-T. Category 5 and 5e link lengths are limited to 100 meters. D-Link DGE-530T User Manual - D-Link DGE-530T | Product Manual - Page 10
computer, Windows® will automatically install the drivers. Windows® XP users: You will receive a bubble stating that Windows found the DGE-530T adapter. Windows Vista™ users: You will receive a bubble stating that when Windows finished install the DGE-530T adapter. D-Link DGE-530T User Manual 10 - D-Link DGE-530T | Product Manual - Page 11
tab and then click Device Manager. Windows Vista: Click on the System and Maintenance icon and then click on Device Manager. Step 3: Scroll down and click the plus (+) sign next to Network Adapters. The D-Link DGE-530T V.B1 Gigabit Ethernet Adapter will be listed. D-Link DGE-530T User Manual 11 - D-Link DGE-530T | Product Manual - Page 12
IP address, subnet mask, and the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. D-Link DGE-530T User Manual 12 - D-Link DGE-530T | Product Manual - Page 13
real-time programs optimally utilize the network bandwidth. High priority packets will be processed before low priority packets. NOTE: To implement QoS on the DGE-530T, it must be connected to a switch or other device that supports and is configured for 802.1p QoS. D-Link DGE-530T User Manual 13 - D-Link DGE-530T | Product Manual - Page 14
bytes) are used. • Jumbo frames may be simultaneously used with VLANs. NOTE: Jumbo frames settings on a switch must be set to 8 bytes or larger than the adapter settings for Windows® operating systems, and at least 22 bytes larger for all other operating systems. D-Link DGE-530T User Manual 14 - D-Link DGE-530T | Product Manual - Page 15
this program may be found by clicking the Help button of the current screen. This should provide you with any information you should need. Note: D-Link Network Control is not supported for Windows® XP 64 Bit Edition and Windows Vista™ x86 and x64 Bit Edition. D-Link DGE-530T User Manual 15 - D-Link DGE-530T | Product Manual - Page 16
the icon for the D-Link Network Control and select the VCT folder heading at the top of the window as seen below. To test the diagnostic, first disconnect the cable from the remote end node so there is just an open cable connected to the DGE-530T. Click the appropriate adapter from the tree view - D-Link DGE-530T | Product Manual - Page 17
your computer. This tool is only for computers running Windows® 2000 and Windows® XP operating systems. To install the D-Link SNMP Agent, simply click SNMP Agent on the Introduction Page, as shown below, and follow the steps of the Installation Wizard. Installation D-Link DGE-530T User Manual 17 - D-Link DGE-530T | Product Manual - Page 18
Destination Location page will appear. Click Browse to select another folder to install PC Agent. Otherwise click Next to select the default folder C:\ Program Files\DLink\PC Agent. Click Next D-Link DGE-530T User Manual 18 - D-Link DGE-530T | Product Manual - Page 19
Section 4 - SNMP Agent Click Yes, I want to restart my computer now and then click Finish. Click Finish D-Link DGE-530T User Manual 19 - D-Link DGE-530T | Product Manual - Page 20
successfully installing the D-Link Ethernet Adapter Agent and restarting your computer, the function is enabled by clicking Start > Programs > D-Link PC Agent > D-Link PC Agent. Windows will then prompt the user to choose an Ethernet card from a pull down list. D-Link DGE-530T User Manual 20 - D-Link DGE-530T | Product Manual - Page 21
Section 4 - SNMP Agent After choosing the D-Link DGE-530T Gigabit Ethernet Adapter and clicking OK, the user will be prompted with another window to input some personal information. You may input this information now or to set this information later, simply click OK. A brief explanation of this - D-Link DGE-530T | Product Manual - Page 22
check the "Auto launch when Windows starts up." box to ensure the D-Link Ethernet Adapter Agent will automatically start when the Windows operating system commences. To adjust your personal settings, click the Personal button, which will open the following screen. D-Link DGE-530T User Manual 22 - D-Link DGE-530T | Product Manual - Page 23
password of "private" is used and may need to be entered to configure the D-Link Ethernet Adapter Agent. NOTE: The default password for this utility is "private". Clicking the About tab will show the current version of the adapter and the copyright information. D-Link DGE-530T User Manual 23 - D-Link DGE-530T | Product Manual - Page 24
for example the D-Link MIB compiler, to view information on the workstation with the DGE-530T card SNMP Agent feature. The D-Link Network Adapter SNMP Agent supports the following functions of a serial line), this object should contain an octet string of zero length. D-Link DGE-530T User Manual 24 - D-Link DGE-530T | Product Manual - Page 25
informed of an unusual error condition by the operational software (e.g., a disk device driver) but that the device is still 'operational'. An example would be high , the D-Link Network Adapter SNMP Agent supports an RFC 1213-Mib (DLK).mib and a Transmission. mib. D-Link DGE-530T User Manual 25 - D-Link DGE-530T | Product Manual - Page 26
5 - Troubleshooting Troubleshooting If you experience any problems with the adapter, check to see: • that the appropriate driver is loaded; • that the proper grade of cable is employed for the network connection; • that the supporting hub is properly qualified for the application. The DGE-530T - D-Link DGE-530T | Product Manual - Page 27
. Some firewall software programs may block a DHCP request on newly installed adapters. If you are connecting to a wireless network at a hotspot (e.g. hotel, coffee shop, airport), please contact an employee or adminstrator to verify their wireless network settings. D-Link DGE-530T User Manual 27 - D-Link DGE-530T | Product Manual - Page 28
: If the router's LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between 2 and 99. Make sure that the number you choose is not in use on the network. Set Default Gateway the same as the LAN IP address of your router (192.168.0.1). D-Link DGE-530T User Manual 28 - D-Link DGE-530T | Product Manual - Page 29
Appendix A - Networking Basics Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5: Click OK twice to save your settings. D-Link DGE-530T User Manual 29 - D-Link DGE-530T | Product Manual - Page 30
inches (W) 124mm(L) x 51mm(W) Environment • Storage: −25° to 55°C (-13° to 131° F) • Operating: 0° to 40° C (32° to 104° F) • Humidity: 5% to 90% non-condensing • Power Consumption: 5W D-Link DGE-530T User Manual 30 - D-Link DGE-530T | Product Manual - Page 31
on the D-Link website as well as frequently asked questions and answers to technical issues. For customers within Canada: Phone Support: (800) 361-5265 English: 24 Hours - 7 Days French: Lundi - Vendredi 12h - 21h Internet Support: http://support.dlink.ca D-Link DGE-530T User Manual 31 - D-Link DGE-530T | Product Manual - Page 32
will be, at D-Link's option, to replace the non-conforming Software (or defective media) with software that substantially conforms to D-Link's functional specifications for the Software or to refund the portion of the actual purchase price paid that is attributable D-Link DGE-530T User Manual 32 - D-Link DGE-530T | Product Manual - Page 33
any accessories. • The customer is responsible for all in-bound shipping charges to D-Link. No Cash on Delivery ("COD") is allowed. Products sent COD will be rejected by D-Link. Products shall be fully insured by the customer and shipped to D-Link Networks, Inc., D-Link DGE-530T User Manual 33 - D-Link DGE-530T | Product Manual - Page 34
, firmware or other products or services provided by anyone other than D-Link; and Products that have been purchased from inventory clearance or liquidation sales or other sales in which D-Link, PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT. D-Link DGE-530T User Manual 34 - D-Link DGE-530T | Product Manual - Page 35
notice. Copyright 2008 by D-Link Corporation/D-Link Networks, Inc. All rights reserved. CE Mark Warning: This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. D-Link DGE-530T User Manual 35 - D-Link DGE-530T | Product Manual - Page 36
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee outside the United States, please contact the corresponding local D-Link office. D-Link DGE-530T User Manual 36 - D-Link DGE-530T | Product Manual - Page 37
Appendix E - Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 2.5 December 15, 2008 D-Link DGE-530T User Manual 37
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
 |
 |
