D-Link DGE-560T Product Manual

D-Link DGE-560T - Gigabit PCI-Express SNMP VLAN Flow Control Network Adapter Manual

Get D-Link DGE-560T - Gigabit PCI-Express SNMP VLAN Flow Control Network Adapter PDF manuals and user guides
UPC - 790069273971
View all D-Link DGE-560T manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DGE-560T manual content summary:

  • D-Link DGE-560T | Product Manual - Page 1
  • D-Link DGE-560T | Product Manual - Page 2
    of such revisions or changes. Manual Revisions Revision 1.0 Date May 1, 2006 1.1 September 26, 2007 Description • DGE-560T Revision A1/A2 • Added Windows Vista™ support • Added PC Agent (SMTP) utility • Added Network Control Program Trademarks D-Link and the D-Link logo are trademarks or
  • D-Link DGE-560T | Product Manual - Page 3
    32/64-bit 10 Linux 11 Novell Netware 13 Novell Netware 5.10 13 Novell Netware 6.x 14 FreeBSD 15 Verify Installation 16 Networking Basics 40 About Gigabit Ethernet 40 About Auto-negotiation 40 Technical Specifications 42 Technical Support 43 Warranty 44 Registration 50 D-Link DGE-560T
  • D-Link DGE-560T | Product Manual - Page 4
    choosing the D-Link DGE-560T Gigabit PCI Express Ethernet Adapter, the value leader among Fast Ethernet/Gigabit Ethernet adapters. This chapter provides a general description of D-Link DGE-560T features, with a summary of features at the end of the chapter. Installation instructions are provided in
  • D-Link DGE-560T | Product Manual - Page 5
    Package Contents D-Link DGE-560T Gigabit PCI Express Ethernet Adapter CD-ROM System Requirements Minimum System Requirements PC with the following: • Windows® 2000/2003/XP/Vista™, Linux (2.4.13 and higher), Netware 5.10 and Netware 6.x., or FreeBSD 5.x (Intel x86) • Pentium 150MHz or Faster •
  • D-Link DGE-560T | Product Manual - Page 6
    2003 • Microsoft Windows® 2000 (service pack 4) • Linux kernel 2.4.13 and higher stable version • Microsoft Network Client for DOS (NDIS 2 driver) • NetWare Client for DOS (ODI driver) Note: The D-Link Network Control Program is not supported under Windows Vista™. D-Link DGE-560T User Manual 
  • D-Link DGE-560T | Product Manual - Page 7
    lights yellow when the port is connected to a 1000Mbps Gigabit Ethernet Network and the indicator lights green when the port is connected to a 100Mbps Fast Ethernet Network. Otherwise, this indicator remains off when the port is connected to a 10Mbps Ethernet Network. D-Link DGE-560T User Manual 
  • D-Link DGE-560T | Product Manual - Page 8
    Drivers. Note: If the Autorun CD function does not automatically start on your computer, go to Start > Run. In the run command box type "D:\ Autorun.exe" (where D: represents the drive letter of your CD-ROM drive). 2. After a few moments, the Finish screen will appear. Click OK. D-Link DGE-560T
  • D-Link DGE-560T | Product Manual - Page 9
    correct force to insert the adapter into the PCI Express slot. 3. Locate an empty PCI Express slot on the motherboard. 4. Insert the network adapter into the PCI Express slot and push it down any newly installed adapter. Skip to page 16 to verify your installation. D-Link DGE-560T User Manual 
  • D-Link DGE-560T | Product Manual - Page 10
    : If you've installed the adapter before installing the driver, please continue with the following procedures. Windows® 2000 1. After you have installed the network adapter in your computer, boot Windows 2000. Windows 2000 detects the DGE-560T network adapter as "Ethernet Controller" during the boot
  • D-Link DGE-560T | Product Manual - Page 11
    installed the network adapter in your computer, boot Windows Server 2003.The window "Welcome to Found New Hardware Wizard" is displayed. On the screen the menu "Can Windows connect to Windows Update to search for software" is displayed. If you are installing the driver using Windows® XP Service Pack
  • D-Link DGE-560T | Product Manual - Page 12
    "What do you want the wizard to do?" is displayed. 4. Select the check box Specify the location of the driver (Advanced). 5. Proceed with step 4 of the installation procedure described in section "Windows® XP and Windows Server 2003 (32-bit)" on the previous page. D-Link DGE-560T User Manual 
  • D-Link DGE-560T | Product Manual - Page 13
    driver software. 8. The window "Browse for driver software on your computer" is displayed. Browse the path to the driver and click Next. 9. The window "Windows has successfully updated your driver software" is displayed. 10. Click Close to complete the installation. D-Link DGE-560T User Manual 10
  • D-Link DGE-560T | Product Manual - Page 14
    Linux The Linux driver for the DGE-560T network adapter supports the Linux kernel 2.4.13 and higher stable versions. The installation procedure described in this manual is a general description for Intel/x86 computers, which is valid for all distributions. The installation package offers the
  • D-Link DGE-560T | Product Manual - Page 15
    to start the script: cd DriverInstall ./install.sh 2. Select the option INSTALLATION MODE. The driver is now compiled and loaded. This process can take a few minutes. For more information on can be found in the directory /usr/src/linux/ Documentation/ on your system). D-Link DGE-560T User Manual 12
  • D-Link DGE-560T | Product Manual - Page 16
    Novell Netware The driver is a 32-bit ODI HSM Novell NetWare server driver for the DGE-560T network adapter. It supports both Netware 5.10 and Netware 6.x. In addition to the 32-bit server driver, a Novell ODI 16-bit DOS client MLID driver is available for the latest Novell NetWare VLM Client. Note:
  • D-Link DGE-560T | Product Manual - Page 17
    Select CONTINUE. 10. To configure the protocols to be used, select ADD PROTOCOL. 11. Select RETURN TO THE DRIVER SUMMARY to finish the installation. 12. If desired, change the network adapter parameters or bindings in the autoexec.ncf file using the "Nwconfig" tool. D-Link DGE-560T User Manual 14
  • D-Link DGE-560T | Product Manual - Page 18
    DHCP instead of the local IP address: ifconfig_myk0="DHCP" Thus, the interface is configured. 8. Repeat step 7 for each network adapter installed. 9. Reboot your system. On reboot, the driver will be loaded and the network adapter will be configured automatically. D-Link DGE-560T User Manual 15
  • D-Link DGE-560T | Product Manual - Page 19
    the Hardware tab and then click Device Manager. Windows Vista™: Click on System and Maintenance and then click on Device Manager. Step 3: Scroll down and click the plus (+) sign next to Network Adapters. The D-Link DGE-560T Gigabit CardBus PC Card will be listed. D-Link DGE-560T User Manual 16
  • D-Link DGE-560T | Product Manual - Page 20
    the IP address, subnet mask, and the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. D-Link DGE-560T User Manual 17
  • D-Link DGE-560T | Product Manual - Page 21
    your D-Link network adapter and select Properties. Step 3 Highlight Internet Protocol (TCP/IP) and click Properties. Step 4 Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router. D-Link DGE-560T User Manual 18
  • D-Link DGE-560T | Product Manual - Page 22
    is a number between 2 and 99. Make sure that the number you choose is not in use on the network. Set Default Gateway the same as the LAN IP address of your router (192.168.0.1). Set Primary DNS the server from your ISP. Step 5 Click OK twice to save your settings. D-Link DGE-560T User Manual 19
  • D-Link DGE-560T | Product Manual - Page 23
    DGE-560T has been installed correctly, check steps 1 and 2 again. If you continue to encounter a problem, please call D-Link Technical Support for assistance. Troubleshooting the Hardware Installation If you experience any problems with the hardware installation, first ascertain that all network
  • D-Link DGE-560T | Product Manual - Page 24
    have a problem. Double-click the "D-Link DGE-560T Gigabit PCI Express Ethernet Adapter", and read the explanation of the problem. This information will be helpful if you require technical support from D-Link. Verify Cable Connections Check to see that the computer you are troubleshooting is properly
  • D-Link DGE-560T | Product Manual - Page 25
    mismatches. 1. Insert the CD-ROM that came with your D-Link DGE-560T Gigabit PCI Express Ethernet Adapter into your CD-ROM drive. 2. Choose Drivers > Virtual Cable Tester, and click Install the package. 3. Follow the instructions provided by the installation wizard. 4. Go to Start > Programs
  • D-Link DGE-560T | Product Manual - Page 26
    of the link, e.g., 10Mbps, 100Mbps, or 1000Mbps. (If no link is up, "no link" is displayed.) • Not present-Cable pair is not present. This applies for network adapters which can only run with speeds of 10Mbps and 100Mbps and therefore do not use all cable pairs. D-Link DGE-560T User Manual 23
  • D-Link DGE-560T | Product Manual - Page 27
    your DGE-560T Card Follow these steps to Ping a device: Ping is the acronym for Packet Internet Groper (PING), a utility to determine if a specific IP address is accessible. It works by sending a packet to the specified address and waiting for a reply. Ping is primarily used to troubleshoot Internet
  • D-Link DGE-560T | Product Manual - Page 28
    VLAN Identifier and name for the system in which it is installed. Please follow procedures for installing D-Link Network Control program. 1. To launch the D-Link Network Control installation program, click the D-Link Network Control button from the autorun screen. D-Link DGE-560T User Manual 25
  • D-Link DGE-560T | Product Manual - Page 29
    2. Click Next. 3. Check I accept the terms in the license agreement radio button and click Next. D-Link DGE-560T User Manual 26
  • D-Link DGE-560T | Product Manual - Page 30
    4. Click Next. 5. Click Install. D-Link DGE-560T User Manual 27
  • D-Link DGE-560T | Product Manual - Page 31
    D-Link Network Control Program, go to Start > Settings > Control Panel then double-click the D-Link Network Control icon in the Control Panel folder. Note: D-Link Network Control Program can be installed and used on Windows® 2000, Windows® XP, and Windows® Server 2003. D-Link DGE-560T User Manual
  • D-Link DGE-560T | Product Manual - Page 32
    multiple adapters installed, select the DGE-560T from the list and click OK. Click the menu tab for the menu you want to view. Note: The Power Management and Sensors functions are not currently supported on the adapter. To add VLAN ID, click the Virtual LAN menu tab. D-Link DGE-560T User Manual 29
  • D-Link DGE-560T | Product Manual - Page 33
    In the Virtual LAN menu tab, pick the adapter you want to add then click the Add VLAN button. In the Add Virtual LAN pop-up menu, select the optional. The Add Virtual LAN menu is also used to configure Jumbo Frames, Transmit Buffers, and Receive Buffers. Click OK. D-Link DGE-560T User Manual 30
  • D-Link DGE-560T | Product Manual - Page 34
    SNMP agent described in the SNMP Agent section in this manual, and support for 802.1p priority. To enable or disable 802.1p support on the adapter, right-click on the Local Area Connection icon in Network Connections and click Properties. Click the Configure button. D-Link DGE-560T User Manual 31
  • D-Link DGE-560T | Product Manual - Page 35
    Support from the Property list and select On to enable or Off to disable from the Value drop-down list menu. Other advanced configuration features that can be changed or enabled include Flow Control, Jumbo Frames, Log Status Messages, Transmit and Receive buffers and others. D-Link DGE-560T User
  • D-Link DGE-560T | Product Manual - Page 36
    these steps to install the SNMP Agent on the PC on which the DGE-560T adapter and driver had already been installed that is running Microsoft Windows® 2000, Server 2003, Server 2003 x64 Edition, XP or XP 64-bit operating system. The SNMP Agent includes MIB files used for device management using
  • D-Link DGE-560T | Product Manual - Page 37
    a different location, click Browse and find the preferred location or type a complete file name and path in the Browse menu. To continue click on Next. D-Link DGE-560T User Manual 34
  • D-Link DGE-560T | Product Manual - Page 38
    4. Select the Program Folder in which the file will be located and click on Next. 5. Select Yes, I want to restart my computer now and click Finish. D-Link DGE-560T User Manual 35
  • D-Link DGE-560T | Product Manual - Page 39
    Agent for Windows start up DGE-560SX from the drop down list and click OK. The D-Link Ethernet Adapter Agent menu appears with the Configuration tab displayed. Note: The drop-down menu in the Configuration tab lists any installed adapters capable of using the SNMP Agent. D-Link DGE-560T User Manual
  • D-Link DGE-560T | Product Manual - Page 40
    folder), find the D-Link PC Agent folder, open it and double-click the D-Link PC Agent icon. Configure Name, Location and Contact information in the Personal Setting menu and click OK. Personal Setting information is shared with SNMP capable devices on the network. D-Link DGE-560T User Manual 37
  • D-Link DGE-560T | Product Manual - Page 41
    change the administrative password, click the Password button in the Options menu tab of the D-Link Ethernet Adapter Agent menu. The current password must be entered to view the Password Setting menu. Enter Agent, it is necessary to enter the administrative password. D-Link DGE-560T User Manual 38
  • D-Link DGE-560T | Product Manual - Page 42
    the adapter. To view the error log click on the Error Log tab to select it. The error log is displayed: To save the error log to the system's hard disk, click the Save button and choose a location at the prompt. To delete all log entries click the Clear button D-Link DGE-560T User Manual
  • D-Link DGE-560T | Product Manual - Page 43
    Gigabit Ethernet retains the traditional Ethernet CSMA/CD (Carrier Sense, Multiple Access, and Collision Detect) protocol, it remains wholly compatible with 100Mbps Ethernet while providing a tenfold increase in network capacity. The DGE-560T that is supported by both Link DGE-560T User Manual 40
  • D-Link DGE-560T | Product Manual - Page 44
    provide for autonegotiation; traditional hubs do not.) The parameters to be negotiated between the DGE-560T and its supporting switch or hub include speed (1000Mbps = Gigabit Ethernet, or 100Mbps = Fast Ethernet) and duplex mode (half-duplex or full-duplex). Startup communication between the two
  • D-Link DGE-560T | Product Manual - Page 45
    • Windows Vista™ x64 • Microsoft Windows® XP • Microsoft Windows® Server 2003 • Microsoft Windows® 2000 • Linux kernel 2.4.13 and higher stable version Emission: • FCC Class B • CE mark Class B • VCCI-B Visit http://support.dlink.com for newest releases of drivers. D-Link DGE-560T User Manual 42
  • D-Link DGE-560T | Product Manual - Page 46
    asked questions and answers to technical issues. For customers within the United States: Phone Support: (877) 453-5465 Internet Support: http://support.dlink.com For customers within Canada: Phone Support: (800) 361-5265 Internet Support: http://support.dlink.com D-Link DGE-560T User Manual 43
  • D-Link DGE-560T | Product Manual - Page 47
    the defective Hardware will be refunded by D-Link upon return to D-Link of the defective Hardware. All Hardware or part thereof that is replaced by D-Link, or for which the purchase price is refunded, shall become the property of D-Link upon replacement or refund. D-Link DGE-560T User Manual 44
  • D-Link DGE-560T | Product Manual - Page 48
    the actual purchase price paid that is attributable to the Software. Except as otherwise agreed by D-Link in writing, the . • The customer must obtain a Case ID Number from D-Link Technical Support at 1-877-453-5465, who will attempt to assist the customer dlink.com/. D-Link DGE-560T User Manual 45
  • D-Link DGE-560T | Product Manual - Page 49
    outside of the package. Do not include any manuals or accessories in the shipping package. DLink will only replace the defective portion of the recommend that you use only an Authorized D-Link Service Office. Improper or incorrectly performed maintenance or repair . D-Link DGE-560T User Manual 46
  • D-Link DGE-560T | Product Manual - Page 50
    from D-Link Corporation/D-Link Systems, Inc., as stipulated by the United States Copyright Act of 1976 and any amendments thereto. Contents are subject to change without prior notice. Copyright ©2007 by D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link DGE-560T User Manual 47
  • D-Link DGE-560T | Product Manual - Page 51
    can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that destination. The firmware setting is not accessible by the end user. D-Link DGE-560T User Manual 48
  • D-Link DGE-560T | Product Manual - Page 52
    applicable to products purchased outside the United States, please contact the corresponding local D-Link office. Industry Canada Notice: This device complies with RSS-210 of the Industry per regulations of Industry Canada. The required antenna impedance is 50 ohms. D-Link DGE-560T User Manual 49
  • D-Link DGE-560T | Product Manual - Page 53
    Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 1.1 September 26, 2007 D-Link DGE-560T User Manual 50
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53