D-Link DGS-3620-52T CLI Guide - Page 484
show igmp_snooping forwarding
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 484 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide DGS-3620-28SC:admin#clear igmp_snooping statistics counter Command: clear igmp_snooping statistics counter Success. DGS-3620-28SC:admin# 39-17 show igmp_snooping forwarding Description This command is used to display the switch's current IGMP snooping forwarding table. It provides an easy way for users to check the list of ports that the multicast group comes from in terms of specific sources. The packets come from the source VLAN. They will be forwarded to the forwarding ports. Format show igmp_snooping forwarding {[vlan | vlanid ]} Parameters vlan - (Optional) Specify a VLAN to be displayed. - Specify the VLAN name. The maximum length is 32 characters. vlanid - (Optional) Specify a list of VLANs to be displayed. - Specify the VLAN ID list. Note: If no parameter is specified, the system will display all current IGMP snooping forwarding table entries of the switch. Restrictions None. Example To display all IGMP snooping forwarding entries located on the switch: DGS-3620-28SC:admin#show igmp_snooping forwarding Command: show igmp_snooping forwarding VLAN Name : default Source IP : 10.90.90.114 Multicast Group: 225.0.0.0 Port Member : 2,7 VLAN Name : default Source IP : 10.90.90.10 Multicast Group: 225.0.0.1 Port Member : 2,5 Total Entries : 2 479