D-Link DGS-3630-52PC HW Installation Guide
D-Link DGS-3630-52PC Manual
 |
View all D-Link DGS-3630-52PC manuals
Add to My Manuals
Save this manual to your list of manuals |
D-Link DGS-3630-52PC manual content summary:
- D-Link DGS-3630-52PC | HW Installation Guide - Page 1
- D-Link DGS-3630-52PC | HW Installation Guide - Page 2
DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide installed and used in accordance with this manual, may cause harmful interference to radio CDRH requirements. Application of CE Mark in accordance with 2004/108/EEC EMC Directive and the 2006/95/EC Low Voltage Directives. - D-Link DGS-3630-52PC | HW Installation Guide - Page 3
DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide contains detailed information about the hardware specifications of the switches in this series. It also contains brief information on how to configure and manage a switch in this series. This manual Instructions service - D-Link DGS-3630-52PC | HW Installation Guide - Page 4
DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide The product does not operate correctly when the operating instructions a wet environment. If the system gets wet contact your trained service provider. Do not push any objects into the openings of supporting hardware: iv - D-Link DGS-3630-52PC | HW Installation Guide - Page 5
DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide a single rack or front stabilizers for joined multiple racks before working on the rack. Always load the rack from the not step on or stand on any component when servicing other components in a rack. CAUTION: Never defeat - D-Link DGS-3630-52PC | HW Installation Guide - Page 6
DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide Table of Contents Intended Readers ...3 Typographical Conventions ...3 Notes and Cautions ...3 Safety Instructions ...3 Safety Cautions ...3 General Precautions for Rack-Mountable Products ...4 Protecting Against - D-Link DGS-3630-52PC | HW Installation Guide - Page 7
DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide Connecting to the Switch for the First Time...39 Creating a User Account...39 Configuring the IP Address...40 Connecting to the MGMT Port ...40 Connecting - D-Link DGS-3630-52PC | HW Installation Guide - Page 8
DGS-3630 Series from the threat of worms and viruses, thereby increasing overall reliability, serviceability D-Link DGS-3630 Series includes the following switches: DGS-3630-28TC supports twenty RJ45 following items: One DGS-3630 Series switch. One Quick Installation Guide. One AC power cord - D-Link DGS-3630-52PC | HW Installation Guide - Page 9
DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide Features This switch is packed with an abundance of networking features that span inside and outside of the traditional Layer 3 framework. The list below highlights the significant protocols and features supported Service - D-Link DGS-3630-52PC | HW Installation Guide - Page 10
DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide Access Control List (ACL): IP MAC-based Access Control (MAC) Compound Authentication Guest VLAN Microsoft® NAP Support (IPv4/IPv6) Trusted Host activated via ACL Cable Diagnostics 802.3ah Ethernet Link - D-Link DGS-3630-52PC | HW Installation Guide - Page 11
DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide LLDP-MED MIB, Private MIB, and D-Link Zone Defense. 11 - D-Link DGS-3630-52PC | HW Installation Guide - Page 12
Guide 2. Hardware Components This chapter describes the front, rear, and side panel components of all switches in the series. DGS-3630-28TC Switch DGS-3630-28SC Switch DGS-3630-52TC Switch DGS-3630 at 100 Mbps and 1 Gbps wire-speeds and support a wide collection of SFP transceivers. The Switch is - D-Link DGS-3630-52PC | HW Installation Guide - Page 13
Guide LED Indicators Located on the front panel of this switch are LED indicators: Power, Console, RPS, Fan Err, USB, MGMT, Link/Act indicators for all the ports, and Stack ID. LED Power Console RPS Fan Err USB MGMT Link/Act LEDs Stack ID Figure 2-2 LED indicators for the DGS-3630 manually - D-Link DGS-3630-52PC | HW Installation Guide - Page 14
LED DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide Description The letter 'h' will be an outlet for an external redundant power supply. Figure 2-3 Rear panel view of the DGS-3630-28TC Components that can be found on the rear panel of this switch are listed in - D-Link DGS-3630-52PC | HW Installation Guide - Page 15
Guide Figure 2-4 Side panels of the DGS-3630-28TC DGS-3630-28SC Switch Front Panel Components The front panel of DGS-3630-28SC features a variety of LED indicators and ports. Figure 2-5 Front panel view of the DGS-3630 Mbps and 1 Gbps wire-speeds and support a wide collection of SFP transceivers. - D-Link DGS-3630-52PC | HW Installation Guide - Page 16
Installation Guide LED Indicators Located on the front panel of this switch are LED indicators: Power, Console, RPS, Fan Err, USB, MGMT, Link/Act indicators for all the ports, and Stack ID. LED Power Console RPS Fan Err USB MGMT Link/Act LEDs Stack ID Figure 2-6 LED indicators for the DGS-3630 - D-Link DGS-3630-52PC | HW Installation Guide - Page 17
LED DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide Description automatically by the system. The an outlet for an external redundant power supply. Figure 2-7 Rear Panel view of the DGS-3630-28SC Components that can be found on the rear panel of this switch are listed - D-Link DGS-3630-52PC | HW Installation Guide - Page 18
Guide Figure 2-8 Side panels of the DGS-3630-28SC DGS-3630-52TC Switch Front Panel Components The front panel of DGS-3630-52TC features a variety of LED indicators and ports. Figure 2-9 Front panel view of the DGS-3630 Mbps and 1 Gbps wire-speeds and support a wide collection of SFP transceivers. - D-Link DGS-3630-52PC | HW Installation Guide - Page 19
DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide LED Power Console RPS Fan to 9 and the following letters H, h, E, and G. The stacking ID (1 to 9) can be assigned manually by the user or automatically by the system. The letter 'H' will be displayed if this switch is the - D-Link DGS-3630-52PC | HW Installation Guide - Page 20
DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide Components that can be found on the rear panel of this switch are listed in the table below. Component Description Security Lock Switch GND AC - D-Link DGS-3630-52PC | HW Installation Guide - Page 21
DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide Side Panel Components The side panels of this switch contain heat vents, fans, and rack-mounting screw which could lead to system failure or even severely damaged components. Figure 2-12 Side panels of the DGS-3630-52TC 21 - D-Link DGS-3630-52PC | HW Installation Guide - Page 22
DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide 3. Installation Installation Guidelines Installing the Switch feet to the Switch Install the Switch on a sturdy, level surface that can support the weight of the Switch (see the Weight section in Appendix A - Technical - D-Link DGS-3630-52PC | HW Installation Guide - Page 23
DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide Installing the Switch in a Standard 19" Rack This section is used to guide connect various other networking devices to this switch that do not support the standard RJ45 wiring connection. These ports are generally used to - D-Link DGS-3630-52PC | HW Installation Guide - Page 24
DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide used to connect devices to the Switch SFP+ ports. Figure 3-4 Inserting transceivers into the transceiver ports The SFP+ ports also support other transceiver form factors like SFP and SFP+ transceivers. A complete list of SFP - D-Link DGS-3630-52PC | HW Installation Guide - Page 25
DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide Figure 3-5 Insert Tie Wrap into the Switch 2. Plug the AC power cord into the power socket of the Switch. Figure 3-6 Connect the power cord to - D-Link DGS-3630-52PC | HW Installation Guide - Page 26
DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide Figure 3-7 Slide the Retainer through the Tie Wrap 4. Circle the tie of the retainer around the power cord and into the locker of the retainer. Figure 3-8 Circle around the power cord 26 - D-Link DGS-3630-52PC | HW Installation Guide - Page 27
DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide 5. Fasten the tie of the retainer power supply on the other end. The RPS provides a lowcost, simple solution to the problem of an inadvertent failure of the internal power supply of an Ethernet switch, which can result - D-Link DGS-3630-52PC | HW Installation Guide - Page 28
Stackable Managed Switch Hardware Installation Guide Figure 3-10 Connecting a DGS-3630 Series Switch to the DPS -mountable unit designed to hold up to two RPS units. NOTE: This rack-mount chassis supports the following RPS units: DPS-500A and DPS-500DC. The following diagram illustrates how a DPS - D-Link DGS-3630-52PC | HW Installation Guide - Page 29
DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide Figure 3-12 Install the DPS-800 in an Equipment Rack 29 - D-Link DGS-3630-52PC | HW Installation Guide - Page 30
DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide 4. Switch Connections Switch to an End port to the Switch via a twisted pair Category 5e UTP/STP cable. Connect a switch supporting an optical fiber uplink to the Switch's SFP/SFP+ ports via fiber optical cabling. Figure - D-Link DGS-3630-52PC | HW Installation Guide - Page 31
3 Stackable Managed Switch Hardware Installation Guide Switch Stacking The DGS-3630 series supports stacking up to 9 switches together while ports to scale and stack the Switches. This increases overall reliability, serviceability, and availability. Duplex Chain - The Duplex Chain topology stacks - D-Link DGS-3630-52PC | HW Installation Guide - Page 32
DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide The figure below illustrates how switches can be stacked in a Duplex Chain formation using optical fiber cables connected to SFP+ transceivers or DAC with SFP+ - D-Link DGS-3630-52PC | HW Installation Guide - Page 33
DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide The figure below illustrates how switches can be stacked in a Duplex Ring formation using optical fiber cables connected to SFP+ transceivers or DAC with SFP+ - D-Link DGS-3630-52PC | HW Installation Guide - Page 34
DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide Switch to a Server The Switch is ideal for connecting to a network backbone, server, or server farm. The RJ45 ports operate at a speed of 10/100/ - D-Link DGS-3630-52PC | HW Installation Guide - Page 35
management features. For more detailed information about the CLI, refer to the DGS-3630 Series CLI Reference Guide. SNMP-based Management The Switch can be managed with an SNMP-compatible console program. The Switch supports SNMP v1, SNMPv2c and SNMPv3. The SNMP agent decodes the incoming SNMP - D-Link DGS-3630-52PC | HW Installation Guide - Page 36
DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide Connect the male DB9 connector on the console cable (shipped with the Switch) to the RS-232 serial port on the computer running terminal emulation - D-Link DGS-3630-52PC | HW Installation Guide - Page 37
DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide Connecting to the Mini-USB Console Port To use the mini-USB console port, the following equipment is needed: A terminal or a computer with a USB 2.0 port - D-Link DGS-3630-52PC | HW Installation Guide - Page 38
DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide Set the terminal emulation software as follows: Select the serial port that belongs to the virtual COM port. Set the data rate to 115200 baud. - D-Link DGS-3630-52PC | HW Installation Guide - Page 39
DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide NOTE: After a connection to the establish a new connection. Connecting to the Switch for the First Time The Switch supports user-based security that can prevent unauthorized users from accessing the Switch or changing its - D-Link DGS-3630-52PC | HW Installation Guide - Page 40
DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide 4. Enter the username NewUser privilege 15 command. Press Enter. This will configure this user account to have Administrative (15) privileges. 5. Enter the line console command - D-Link DGS-3630-52PC | HW Installation Guide - Page 41
DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide Switch#configure terminal Switch(config)#interface operation, monitor performance, and detect potential problems in the Switch, switch group, or network. Managed devices that support SNMP include software (referred to as an - D-Link DGS-3630-52PC | HW Installation Guide - Page 42
DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide Management Information Base (MIB) A Management management software. In addition to the standard MIB-II, the Switch also supports its own proprietary enterprise MIB as an extended Management Information Base. The proprietary - D-Link DGS-3630-52PC | HW Installation Guide - Page 43
DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide 6. Web-based Switch Configuration with the Switch using the HTTP or HTTPS (SSL) protocol. The following web browsers are supported: Internet Explorer (version 7 and later) Firefox Google Chrome Safari Logging - D-Link DGS-3630-52PC | HW Installation Guide - Page 44
DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide NOTE: After a user account was created, login credentials will be required to access the Web UI. During the sending and receiving of the login password - D-Link DGS-3630-52PC | HW Installation Guide - Page 45
AREA 2 AREA 3 AREA 4 DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide This area displays a file explorer-type be viewed and configured in this folder. Features regarding the Quality of Service functionality of the Switch can be viewed and configured in this folder. - D-Link DGS-3630-52PC | HW Installation Guide - Page 46
DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide Appendix A - Technical slot only supports FAT16 and FAT32 file system architectures DGS-3630-28TC: 42.4 Watts (Max.), 28.1 Watts (Standby) DGS-3630-28SC: 63.58 Watts (Max.), 30.1 Watts (Standby) DGS-3630-52TC: 62 - D-Link DGS-3630-52PC | HW Installation Guide - Page 47
4 MBytes per device 12 KBytes DGS-3630-28TC: 128 Gbps DGS-3630-28SC: 128 Gbps DGS-3630-52TC: 176 Gbps DGS-3630-28TC: 95.24 Mpps DGS-3630-28SC: 95.24 Mpps DGS-3630-52TC: 130.95 Mpps 8 Priority Queues per port. Supports 68K MAC addresses (SRM's LAN mode) Supports 1024 Static MAC addresses IPv4: 16K - D-Link DGS-3630-52PC | HW Installation Guide - Page 48
DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide LED Indicators Location Per Device LED Per 10/100/1000 Mbps Port LED per SFP Port LED Power MGMT Console Fan Err RPS USB Stacking - D-Link DGS-3630-52PC | HW Installation Guide - Page 49
DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide Location LED per SFP+ Port LED standards: IEEE 802.3u compliance IEEE 802.3z compliance IEEE 802.3ah compliance SFP Transceivers Supported: DEM-210 (100BASE-FX, single-mode, 15 km) DEM-302S-LX (1000BASE-LX, - D-Link DGS-3630-52PC | HW Installation Guide - Page 50
DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide Feature SFP+ Ports Description DEM-330R DDM) DEM-434XT (10GBASE-ZR, single-mode, 80 km, without DDM) WDM (BiDi) SFP+ Transceivers Supported: DEM-436XT-BXD (10GBASE-LR, single-mode, 20 km, TX: 1330 nm / RX: 1270 nm, - D-Link DGS-3630-52PC | HW Installation Guide - Page 51
DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide Appendix B - Cables and Connectors Ethernet Cable When connecting the Switch to another switch, a bridge or hub, a straight-through Cat5/5e/6a/7 cable is necessary. Please - D-Link DGS-3630-52PC | HW Installation Guide - Page 52
DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide Console Cable (RJ45 to RS-232) A console cable is used to connect to the RJ45 console port of the Switch to access the command line - D-Link DGS-3630-52PC | HW Installation Guide - Page 53
DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide Console Cable (USB to Mini-USB) A console cable is used to connect to the USB console port of the Switch to access the command line - D-Link DGS-3630-52PC | HW Installation Guide - Page 54
DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide Redundant Power Supply (RPS) Cable When connecting the Switch to a Redundant Power Supply, an RPS cable is necessary. Please review this product for matching cable - D-Link DGS-3630-52PC | HW Installation Guide - Page 55
DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide Alarm Connector (RJ45) External devices can be connected to the alarm port to either trigger an alarm event or to be the recipient of an - D-Link DGS-3630-52PC | HW Installation Guide - Page 56
be rendered by D-Link at an Authorized D-Link Service Office. The replacement hardware need not be new or obtain a Case ID Number from D-Link Technical Support at 1-877-453-5465, who will attempt to outside of the package. Do not include any manuals or accessories in the shipping package. D-Link will - D-Link DGS-3630-52PC | HW Installation Guide - Page 57
OF GOODWILL, LOSS OF REVENUE OR PROFIT, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, FAILURE OF TO D-LINK FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT and used in accordance with the instructions, may cause harmful interference to radio - D-Link DGS-3630-52PC | HW Installation Guide - Page 58
Product Registration Register your D-Link product online at http://support.dlink.com/register/ Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. - D-Link DGS-3630-52PC | HW Installation Guide - Page 59
U.S. and Canadian customers This guide is only for initial configuration. Please refer to the user manual to learn more or visit http://www.mydlink.com for more information. Also feel free to contact us. U.S. and Canadian customers can contact D-Link Technical Support through our website. USA http - D-Link DGS-3630-52PC | HW Installation Guide - Page 60
ÜTZUNG ASSISTANCE TECHNIQUE ASISTENCIA TÉCNICA SUPPORTO TECNICO TECHNISCHE ONDERSTEUNING POMOC TECHNICZNA TECHNICKÁ PODPORA TECHNICKÁ PODPORA TECHNIKAI TÁMOGATÁS TEKNISK SUPPORT TEKNISK SUPPORT TEKNISK STØTTE TEKNINEN TUKI ASSISTÊNCIA TÉCNICA TEHNIČKA PODRŠKA TEHNIČNA PODPORA SUPORT TEHNIC dlink - D-Link DGS-3630-52PC | HW Installation Guide - Page 61
Australia customers Tel: 1300-700-100 24/7 Technical Support Web: http://www.dlink.com.au E-mail: [email protected] India customers Tel: +91-832-2856000 Toll Free 1800-233-0000 mail : [email protected] New Zealand customers Tel: 0800-900-900 24/7 Technical Support Web: http://www.dlink.co.nz E-mail - D-Link DGS-3630-52PC | HW Installation Guide - Page 62
12 661 2025 08600 DLINK (for South Africa only) Monday to Friday 8:30am to 9:00pm South Africa Time Web: http://www.d-link.co.za E-mail: [email protected] D-Link Middle East - Dubai, U.A.E. customers Plot No. S31102, Jebel Ali Free Zone South, P.O.Box 18224, Dubai, U.A.E. Tel: +971-4-8809022 Fax - D-Link DGS-3630-52PC | HW Installation Guide - Page 63
, Argentine Sq. , Tehran IRAN Postal Code : 1513833817 Tel: +98-21-88880918,19 +98-21-88706653,54 General Inquiries: [email protected] Tech Support: [email protected] Morocco customers M.I.T.C Route de Nouaceur angle RS et CT 1029 Bureau N° 312 ET 337 Casablanca , Maroc Phone : +212 663 72 - D-Link DGS-3630-52PC | HW Installation Guide - Page 64
54 49 71 Ext:14 Fax: +961 4 54 49 71 Ext:12 Email: [email protected] Bahrain customers Technical Support: +973 1 3332904 Kuwait customers Technical Support: + 965 22453939 / +965 22453949 Türkiye customers Büyükdere Cad. Ferro Plaza No:155 D: 1 K: 1 Zincirlikuyu / Istanbul Tel: +90 (212) 289-56 - D-Link DGS-3630-52PC | HW Installation Guide - Page 65
Link D-Link D-Link: 8-800-700-5465 http://www.dlink.ru e-mail: [email protected] Офисы 14 Тел. : +7 (495) 744-00-99 E-mail: 373(22) 80-81-07 E-mail:[email protected] 169 Тэл.: +375 (17) 218-13-65 E-mail: [email protected] 143 7 (727) 378-55-90 E-mail: [email protected] 3 23/5 Հեռ.՝ +374 (10 - D-Link DGS-3630-52PC | HW Installation Guide - Page 66
Soporte Técnico Para Usuarios En Latino America Por favor revise el número telefónico del Call Center de su país en http://www.dlinkla.com/soporte/call-center Soporte Técnico de D-Link a través de Internet Horario de atención Soporte Técnico en www.dlinkla.com e-mail: [email protected] & consultas - D-Link DGS-3630-52PC | HW Installation Guide - Page 67
Clientes de Brasil Caso tenha dúvidas na instalação do produto, entre em contato com o Suporte Técnico D-Link. Acesse o site: www.dlink.com.br/suporte - D-Link DGS-3630-52PC | HW Installation Guide - Page 68
@dlink.com.tw http://www.dlink.com.tw D-Link 852) 8100 8892 10:00 ~ 19:00 週六： 09:00~13:00 http://www.dlink.com.hk [email protected] 202-210 1樓A室 178號-188 16樓02室 D-Link網站www.dlink.com - D-Link DGS-3630-52PC | HW Installation Guide - Page 69
dapat diperoleh pada situs web D-Link. Dukungan Teknis untuk pelanggan: Tel: 0800-14014-97 (TOLL FREE) Dukungan Teknis D-Link melalui Internet: Email : [email protected] Website : http://www.dlink.co.id 中國客戶 400-629-6688 [email protected] http://www.dlink.com.cn 400 9:00-19:00 - D-Link DGS-3630-52PC | HW Installation Guide - Page 70
Reseller's name Telephone Answers to the following questions help us to support your product: 1. Where and how will the product primarily be used? Home Office Travel Company Business Home Business Personal Use 2. How many employees work at installation site? 1 employee 2-9 10-49 50-99 100-499 500- - D-Link DGS-3630-52PC | HW Installation Guide - Page 71
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
 |
 |
