D-Link DGS-6600-48T Product Manual - Page 123

DGS-6604 m clear running-config factory-defaults clear running-config factory-defaults Use this command to clear the system's running configuration. clear running-config factory-defaults Syntax None Command Mode Privileged EXEC at level 15 Usage Guideline The user can enter the clear running-config factory-defaults command to clear the system configuration retained in Dynamic RAM. Before using the clear running-config factory-defaults command, save a backup of the configuration using the copy command or upload a configuration profile into the system. When the clear running-config factory-defaults command is entered, the system resets the running configuration with the factory default settings. Since the command clears all of system configuration settings including IP parameters, any remote management applications will loose their connections. Therefore, before proceeding, a confirmation should be applied. In addition, it is suggested to reload a configuration file immediately after clearing the configuration. The clear running-config command clears all system configuration settings including the MGMT-IP address which is set back to the factory default of 10.90.90.90/8. Example The following example demonstrates how to clear system running configuration. Switch# clear running-config factory-defaults Switch# CLI Reference Guide 113