D-Link DGS-6600-48T Product Manual - Page 127

DGS-6604 m clock summer-time clock summer-time Use one of the optional keyword formats of the clock summer-time command to configure the system time to automatically set the seasonal time adjustment (daylight saving time). To disable automatic seasonal time adjustment, use the no form of this command. clock summer-time recurring WEEK DAY MONTH HH:MM WEEK DAY MONTH HH:MM [ OFFSET ] clock summer-time date DATE MONTH HH:MM DATE MONTH HH:MM [ OFFSET ] no clock summer-time Syntax Description recurring Indicates that a summer seasonal time change should start and end on the specified day and week of the specified month. For example: summer time adjustment begins Sunday in the first week of April. date Indicates that summer time should start and end on the specified date of the specified month. WEEK Week of the month (1 to 4 or last). DAY Day of the week (sun, mon, and so on). DATE Date of the month (1 to 31). MONTH Month (by name , January, February, and so on). HH:MM Time (24 hours format ) in hours and minutes. OFFSET (Optional) Number of minutes to add during summer time (default is 60)The range of offset is 30, 60, 90 and 120. Default Command Mode Usage Guideline Disabled OFFSET: 60 Global configuration Use this command to automatically make seasonal time changes for the system clock. The recurring mode is used to make time adjustment to begin and end on a specified week day, week and month. Use the date mode to make the time change begin and end on specified calender dates. The syntax for both modes uses the first portion of the parameter to express the begining of the time adjustment period while the ending of the period is expressed in the second portion. CLI Reference Guide 117