D-Link DGS-6600-48T Product Manual - Page 129

DGS-6604 m clock timezone clock timezone Use the command to set the time zone for display purpose. To set the time to Coordinated Universal Time (UTC), use the no form of this command. clock timezone {+|-} HOURS-OFFSET [ MINUTES-OFFSET ] no clock timezone Syntax Description +|- '+' means time to be added to the UTC; '-' means time to be subtracted from the UTC. HOURS-OFFSET Hours difference from UTC. MINUTES-OFFSET (Optional) Minutes difference from UTC. Default Command Mode Usage Guideline Example UTC Global configuration The time obtained by SNTP server refers to the UTC time. The local time will be calculated based on UTC time, time zone, and the daylight saving configuration. The following example shows how to set the time zone to Pacific Standard Time (PST), which is 8 hours behind UTC: Switch# configure terminal Switch(config)# clock timezone - 8 Switch(config)# end Verify the settings by entering the show clock command. CLI Reference Guide 119