D-Link DGS-6600-48T Product Manual - Page 131

DGS-6604 m command prompt command prompt Use this command to change the device cli prompt to, for example: the product name, system name, or other user-defined strings. The command can also specify whether to display the current privilege level in the prompt. command prompt [level | no-level] [string STRING | product-name | system-name] Syntax Description level (Optional) The privilege level information is appended to prompt name. no-level (Optional) No privilege level information is appended to prompt name. string STRING (Optional) Specifies the user-defined prompt. The valid length is 1-8 characters. The syntax is a user-defined string. product-name (Optional) Use the product name as the prompt name system-name (Optional) Use the system name (as defined in SNMP System group MIB) as the prompt name. Default Command Mode Usage Guideline Examples product-name with privilege level Privileged EXEC The prompt refers to the string that appears indicatng to a user to input a command. It consists of two parts. The first part is the prompt name. The second part is the privileged level. Using this command, the user can change the prompt to use either the product name or system name and specify whether or not to display the privilege level in the prompt Either one or both settings can be changed. If the user selects to use the product name or the system name as the prompt, only the first 8 characters are taken. The prompt will be changed immediately after the command is executed. This example shows how to change the prompt to use the system name. DGS-6600:15# command prompt system-name switch:15# The following example shows how to set the command prompt back to default setting: (product name and privilege level). switch:15# command prompt DGS-6600:15# CLI Reference Guide 121