D-Link DGS-6600-48T Product Manual - Page 201

DGS-6604 m erpi protected-vlan erpi protected-vlan Use the erpi protected-vlan command to add or remove service protected VLANs for an ERP instance. Use the no form of this command to remove all service protected VLANs. erpi INSTANCE-ID protected-vlan {VLAN-ID [,|-] | add VLAN-ID [,|-] | remove VLAN-ID [,|-]} no erpi INSTANCE-ID protected-vlan Syntax Description INSTANCE-ID Specifies the identifier of the ERP instance. The valid range is 1 to 4095 VLAN-ID Specifies the VLAN ID of the service protected VLANs of the ERP instance. The valid range is 1 to 4094. Default Command Mode Usage Guideline Example Not configured ERPS domain configuration mode Use the command to configure the VLANs to be protected by the ERP instance. The user should assign the service protected VLANs that are distinguished from the R-APS control VLAN of all created ERP instances. If an ERPS domain contains multiple ERP instances, generally, the VLANs protected by them should be consistent. The following example shows how to configure service protected VLAN as 3 of ERP instance 1: Switch(config-erps-domain)# erpi 1 protected-vlan 3 Switch(config-erps-domain)# The following example shows how to add service protected VLANs "4-6" of ERP instance 1: Switch(config-erps-domain)# erpi 1 protected-vlan add 4-6 Switch(config-erps-domain)# The following example shows how to add service protected VLANs "7,9" of ERP instance 1: Switch(config-erps-domain)# erpi 1 protected-vlan add 7,9 Switch(config-erps-domain)# The following example shows how to remove service protected VLAN "3" of ERP instance 1: CLI Reference Guide 191