D-Link DGS-6600-48T Product Manual - Page 220

DGS-6604 instance instance To map a VLAN or a set of VLANs to a single Multiple Spanning Tree (MST) instance, use the instance command. To return the VLANs to the default instance (CIST), use the no form of this command. instance INSTANCE-ID vlans VLANDID [ , | . ] no instance INSTANCE-ID Syntax Description INSTANCE-ID Instance to which the specified VLANs are mapped; valid values are from 1 to 63. vlans VLANDID [ , | .] Specifies the number of the VLANs to be mapped to the specified instance; valid values are from 1 to 4094. Default Command Mode Usage Guideline Examples No VLANs are mapped to any MST instance (all VLANs are mapped to the CIST instance). MST configuration Any unmapped VLAN is mapped to the CIST instance. This example shows how to map a range of VLANs to instance 2: Switch(config)#spanning-tree mst configuration Switch(config-mst)# instance 2 vlans 1-100 This example shows how to map a VLAN to instance 5: Switch(config)#spanning-tree mst configuration Switch(config-mst)# instance 5 vlans 1100 Verify the settings by entering the show spanning-tree mst configuration command. CLI Reference Guide 210