D-Link DGS-6600-48T Product Manual - Page 263

DGS-6604 ip dvmrp metric ip dvmrp metric Use this command to configure the metric value on the current interface. ip dvmrp metric METRIC Syntax Description METRIC It can be a value from 1 to 31. A value of 32 sets the route metric to infinite or unreachable. Default Command Mode Usage Guideline Example 1 VLAN interface configuration This command is only valid for the VLAN interface. For each source network reported, a route metric is associated with the route being reported. The metric is the sum of the interface metrics between the router originating the report and the source network. DVMRP uses the infinite or unreachable metric which is defined to be 32. This limits the breadth across the entire DVMRP network and is necessary to place an upper boundary on the convergence time of the protocol. By default, a metric value of 1 is associated with each DVMRP route. Use the command to modify the metric value. This example shows how to change the metric value to 2 of an interface. Switch(config)# interface vlan1 Switch(config-if)# ip dvmrp metric 2 Verfiy the settings by the show ip dvmrp interface command. CLI Reference Guide 253