D-Link DGS-6600-48T Product Manual - Page 294

DGS-6604 ip ospf shutdown ip ospf shutdown To initiate a graceful shutdown of Open Shortest Path First (OSPF) protocol at interface level, use the ip ospf shutdown command in router configuration mode. To restart the OSPF protocol on an interface, use the no form of this command. ip ospf shutdown [ IFNAME ] no ip ospf shutdown [ IFNAME ] Syntax Description IFNAME (Optional) Specifies a layer 3 interface. If no option is specified, the command applies to the entire OSPF process. Default Command Mode Usage Guideline Example None Router configuration Use the ip ospf shutdown command to place the OSPF protocol, on a specific interface, into shutdown mode. If no interface is specified with this command, the entire protocol will shutdown in the least disruptive manner and notify its neighbors that it is not available. Traffic that can follow another route through the network, will be directed to that alternate path. The following example shows how to initiate an OSPF protocol shutdown on the layer 3 interface (VLAN 1): Switch(config)# router ospf Switch(config-router)# ip ospf shutdown vlan1 CLI Reference Guide 284