D-Link DGS-6600-48T Product Manual - Page 320

DGS-6604 ip route multi-path ip route multi-path Use ip route multi-path to enable multiple paths for same route. Use the no form of the command to disable multiple paths. ip route multi-path no ip route multi-path Syntax Description None Default Command Mode Enabled Global configuration Usage Guideline If there are multiple routes with the same network-prefix co-existing, specify the route operation mode (multi-path or not) to select the routes that will be active. Examples For the no command, it disables the multiple path function. Only one of the multiple paths will be active. Note: The active path may change from one path to the other under multiple paths mode, as long as the available route with a greater priority becomes reachable. This example shows how to enable multiple paths function. Switch(config)# ip route multi-path This example shows how to disable multiple paths function. Switch(config)# no ip route multi-path Verify the settings by entering the show ip route summary command. CLI Reference Guide 310