D-Link DGS-6600-48T Product Manual - Page 325
ip trusted-host, no ip, snmp] [http] [telnet]], snmp] [http], telnet]
View all D-Link DGS-6600-48T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 325 highlights
DGS-6604 ip trusted-host ip trusted-host Use this command to create the trusted host entries on the switch. Use the no ip trusted-host command to remove the trusted host entries. ip trusted-host {IP-ADDRESS | NETWORK-ADDRESS/PREFIX-LENGTH} [snmp] [http] [telnet]] no ip trusted-host [IP-ADDRESS | NETWORK-ADDRESS/PREFIX-LENGTH] [snmp] [http] [telnet] Syntax Description IP-ADDRESS IPv4 address of the trusted host. NETWORKADDRESS/PREFIXLENGTH IPv4 network of the trusted host. snmp (Optional) Specifies that the host is valid for snmp. http (Optional) Specifies that the host is valid for http. telnet (Optional) Specifies that the host is valid for telnet. Default Command Mode Usage Guideline Examples No default hosts Global configuration at privilege level 15. The ip-trusted host command creates the trusted host entries with access to the management interface. When a trusted-host is not configured, then all hosts are trusted. When adding a trusted-host, if the access interface (snmp, http, or telnet) is not specified, then it applies to all interfaces. Once a trusted-host is configured with an access interface allowed, then only the configured trusted-hosts are allowed access to the access interfaces associated with their entry. If an access interface is not specified in the trusted-host list, then all access to that access interface will be blocked. The number of trusted hosts is project dependent. For the no command, when the host is not specified, all hosts will be deleted for the specified access interface. If no access interface is specified, the specified host will be deleted for all access interfaces. If both the host and access interface are not specified, all trusted hosts will be deleted. This example shows how to add a trusted host with IP address 163.10.50.126 to snmp access interface. Switch(config)# ip trusted-host 163.10.50.126 snmp CLI Reference Guide 315