D-Link DGS-6600-48T Product Manual - Page 366

DGS-6604 • RIP 120 ipv6 route • RIPNG 120 • OSPF 110 • OSPF6 110 • EBGP 20 • IBGP 200 • ISIS 115 Examples Assume that a routing protocol originates the same route to the same destination as an existing static route. However, an operator would like to select the calculation of the best route to choose from the routing protocols first. To do that the operator needs to change the priority of the static route, since the default priority of static routes is usually higher than dynamic routes. This example shows how to create floating static routes. The System will ultimately choose the higher priority (with less distance value) route to be the master route toward the same destination. In this case, the route with distance 11 will be chosen as the master route toward the destination 2001:0DB8::/32. Switch > enable Switch # configure terminal Switch (config) # ipv6 route 2001:0DB8::/32 vlan 1 fe80::0200:00ff:fe00:a0a0 distance 11 Switch (config) # ipv6 route 2001:0DB8::/32 vlan 2 fe80::0200:00ff:fe00:b0b0 distance 22 This example shows how to delete the previously configured static route. Switch > enable Switch # configure terminal Switch (config) # no ipv6 route 2001:0DB8::/32 vlan 1 fe80::0200:00ff:fe00:a0a0 CLI Reference Guide 356