D-Link DGS-6600-48T Product Manual - Page 378
lldp dot1-tlv-select, Specify the Port Vlan ID TLV to send. The Port VLAN ID TLV is an optional
View all D-Link DGS-6600-48T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 378 highlights
DGS-6604 m lldp dot1-tlv-select lldp dot1-tlv-select To specify which optional type-length-value settings (TLVs) in the IEEE 802.1 Organizationally Specific TLV set will be transmitted and encapsulated in the LLDPDUs and sent to neighbor devices, use the lldp dot1-tlv-select command in interface configuration mode. To disable transmit the TLVs, use the no form of this command. lldp dot1-tlv-select { port-vlan | protocol-vlan VLAN-ID [, | -] | vlan-name [VLAN-ID protocol-identify [ PROTOCOL-NAME ] } no lldp dot1-tlv-select { port-vlan | protocol-vlan [VLAN-ID vlan-name [VLAN-ID protocol-identify [PROTOCOL-NAME ] } Syntax Description port-vlan Specify the Port Vlan ID TLV to send. The Port VLAN ID TLV is an optional fixed length TLV that allows a VLAN bridge port to advertise the port's VLAN identifier (PVID) that will be associated with untagged or priority tagged frames. protocol-vlan VLAN- Specify the Port And Protocol VLAN ID (PPVID) TLV to send. The Port and ID [, | -] Protocol VLAN ID TLV is an optional TLV that allows a bridge port to advertise a port and protocol VLAN ID. VLAN-ID [, | -] Specify the ID of the VLAN in the PPVID TLV. The VLAN ID range is 1 to 4094. Separate nonconsecutive VLAN-ID with a comma; use a hyphen to designate a range of VLAN-ID. vlan-name [VLAN-ID [, | -] In no form of this command, the VLAN-ID [, | -] is optional. If no VLAN-ID is specified, all configured PPVID VLANs will be cleared and no PPVID TLV will be sent. Specify the VLAN Name TLV to send. The VLAN Name TLV is an optional TLV that allows an IEEE 802.1Q-compatible IEEE 802 LAN station to advertise the assigned name of any VLAN with which it is configured. VLAN-ID [, | -] (Optional) Specify the ID of the VLAN in the VLAN Name TLV. The VLAN ID range is 1 to 4094. Separate nonconsecutive VLAN-ID with a comma; use a hyphen to designate a range of VLAN-ID. If no VLAN-ID is specified, all applicable VLANs will be sent. In no form of this command, if no VLAN-ID is specified, all configured VLANS for VLAN NAME TLV will be cleared and no VLAN Name TLV will be sent. CLI Reference Guide 368