D-Link DGS-6600-48T Product Manual - Page 384

DGS-6604 m lldp hold-multiplier lldp hold-multiplier To set the hold multiplier for LLDP updates on the switch, use the lldp holdmultiplier command. Use the no form of this command to return to the default settings. lldp hold-multiplier VALUE no hold-multiplier Syntax VALUE Specifies a multiplier on the LLDPDUs transmission interval that used to compute the time to live value of an LLDPDU; valid values are from 2 to 10. Default Command Mode Usage Guideline Example 4 Global configuration This parameter is a multiplier on the LLDPDUs transmission interval that used to compute the TTL value in an LLDPDU. The lifetime is determined by holdmultiplier times tx-interval and up to 65535. At the partner switch, when the timeto-live for a given advertisement expires, the advertised data is deleted from the neighbor switch's MIB. This example shows how to set LLDP hold-multiplier to 3: Switch(config)# lldp hold-multiplier 3 This example shows how to set LLDP hold-multiplier to default value. Switch(config)# no lldp hold-multiplier CLI Reference Guide 374