D-Link DGS-6600-48T Product Manual - Page 387
lldp med-tlv-select, LLDP-MED TLV
View all D-Link DGS-6600-48T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 387 highlights
DGS-6604 m lldp med-tlv-select lldH p med-tlv-select To specify which optional LLDP-MED TLV will be transmitted and encapsulated in the LLDPDUs and sent to neighbor devices, use the lldp med-tlv-select command in Interface configuration mode. To disable transmit the TLVs, use the no form of this command. lldp med-tlv-select [ capabilities | inventory-management | network-policy | powermanagement ] no lldp med-tlv-select [ capabilities | inventory-management | network-policy | powermanagement ] Syntax Description capabilities inventorymanagement (Optional) Transmits 'LLDP-MED Capabilities TLV'. If user wants the physical interface transmit LLDP-MED TLVs, this TLV type should be enabled. Otherwise, the interface cannot transmit any LLDP-MED TLVs. (Optional) Transmits 'LLDP-MED Inventory Management TLV'. network-policy (Optional) Transmits 'LLDP-MED Network Policy TLV'. power-management (Optional) Transmits 'LLDP-MED Extended Power-via-MDI TLV' if local device is PSE device or PD device. When no optional keyword is selected, all supported optional LLDP-MED TLVs are selected or de-selected in no form of this command. Default Command Mode Usage Guideline No LLDP-MED TLV is selected. Interface configuration mode This command is used to enable or disable transmitting LLDP-MED TLVs. Only when voice vlan is enabled, the port is the member of voice vlan and network-policy is selected, then LLDP-MED Network Policy TLV can be advertised from the interface. If you disable transmitting Capabilities TLV, LLDP-MED on the physical interface will be disabled at the same time. In other words, all LLDP-MED TLVs will not be sent, even other LLDP-MED TLVs are enabled to transmit. By default, the switch only sends LLDP packets until it receives LLDP-MED packets from the end device. The switch continues to send LLDP-MED packets until it only receives LLDP packets. CLI Reference Guide 377