D-Link DGS-6600-48T Product Manual - Page 39

DGS-6604 m aaa authorization aaa authorization Use this command to enable the authorization function. Use the no form of the command to disable AAA authorization. aaa authorization no aaa authorization Syntax None Default Disabled Command Mode Usage Guideline Global configuration at privilege level 15 When the AAA authorization function is enabled, the system will use configuration settings authorized by the RADIUS server in addition to the RADIUS server authentication function. Settings can include VLAN assignment, user priority assignment and bandwidth assignment. Example If AAA authorization is disabled, the system only accepts the authentication function from the RADIUS server and ignore any additional configuration settings supplied by the RADIUS server. This example shows how to enable the authorization: Switch# configure terminal Switch(config)# aaa authorization Verify the settings by entering the show system protocol-state command. CLI Reference Guide 29