D-Link DGS-6600-48T Product Manual - Page 42

DGS-6604 m accept dhcp relay-agent accept dhcp relay-agent To accept relay agent information use the accept dhcp relay-agent command, use the no form of the command to reject DHCP relay agent information. accept dhcp relay-agent [circuit-id|remote-id] no accept dhcp relay-agent [circuit-id|remote-id] Syntax Description circiut-id (Optional) Agent Circuit ID Sub-option. remote-id (Optional) Agent Remote ID Sub-option Default Command Mode Usage Guideline Examples DHCP relay-agent is not accepted. DHCP pool configuration If either of circuit-id and remote-id is not specified, it implys that both the circuit-id and remote-id options are applied with the command. If only the circuit-id or remote-id is specified, it implies that it only accepts DHCP packets containing either only a circuit-id or a remote-id. The following example sets DHCP pool1 to accept circuit id and remote id relay agent information. switch > enable switch# configure terminal switch(config)# ip dhcp pool pool1 switch(config-dhcp)# accept dhcp relay-agent switch(config-dhcp)# The following example sets DHCP pool1 to not accept remote id relay agent information. switch > enable switch# configure terminal switch(config)# ip dhcp pool pool1 switch(config-dhcp)# no accept dhcp relay-agent remote-id switch(config-dhcp)# CLI Reference Guide 32