D-Link DGS-6600-48T Product Manual - Page 436

DGS-6604 m naN me name NAME no name name Use the name command to set the name of an MST region. To return to the default name, use the no form of this command. Syntax Description NAME The name given for a specified MST region. The name string has a maximum length of 32 characters and the type is a general string which allows spaces. Default Command Mode Usage Guideline Example NAME: (The MAC Address of the Bridge) MST configuration If two or more switches have the same VLAN mapping and configuration version number, the switches are considered to be in different MST regions if the region names are different. Use the name command to differenciate MST regions. Caution: Use care when the name command is used to set the name of an MST region. A mistake can put the switch in a wrong or different region. The MST region name is a case-sensitive parameter. This example shows how to configure the MSTP configuration name to 'alpha'. Switch(config)#spanning-tree mst configuration Switch(config-mst)# name alpha Verify the settings by entering the show spanning-tree mst configuration command. CLI Reference Guide 426