D-Link DGS-6600-48T Product Manual - Page 467

DGS-6604 m periodic periodic Use the periodic command to specify the period of time to be covered in a time range profile. periodic { daily HH:MM to HH:MM | monthly DATE HH:MM to [DATE] HH:MM | weekly WEEKLY-DAY HH:MM to [ WEEKLY-DAY ] HH:MM } Syntax Description daily HH:MM to HH:MM Specifies the time of day with an hour:minute format HH:MM, using a 24-hour clock (for example, 14:30). The first HH:MM time entered must be earlier than the second HH:MM. Note: The HH range is 00 ~ 23; The MM range is 00 ~ 59. weekly WEEKLY-DAY Specifies the day of the week and time of day in the format day HH:MM, where HH:MM to [ WEEKLY- the day of the week name is used i.e. monday, tuesday, wednesday, thursday, DAY ] HH:MM friday, saturday, and sunday. monthly DATE HH:MM to [ DATE ] HH:MM If the ending day of the week is the same as the starting day of the week, it can be omitted (then it is the same as the daily format). Specifies the numeric date, from 1 to 31, and the time of day, in the format DATE HH:MM. If the day does not exist on the calender, the specified time period will be skipped. For example, since April has only 30 days an entry such as "April 31" will be ignored. Default Command Mode Usage Guideline Example None Time-range configuration Up to 6 periods can be specified in the same profile. A new period entry can partially overlap an older existing one. If a new period's starting and the ending time are identical to a previous entry, a warning message is displayed and the configuration will not be accepted. Note: To remove an individual period entry delete the time-range and then create a new time-range to which the correct period entry can be added. This example shows how to make a time-range which includes the periods daily 09:00 to 12:00, 00:00 Saturday to 23:59 Sunday, and 19:00 of the 1st day to 17:00 of the 2nd day of every month. Switch(config)#time-range rdtime Switch(config-time-range)#periodic daily 9:00 to 12:00 Switch(config-time-range)#periodic weekly saturday 00:00 to sunday 23:59 Switch(config-time-range)#periodic monthly 1 19:00 to 2 17:00 Switch(config)#end Verify the settings by entering the show time-range command. CLI Reference Guide 457