D-Link DGS-6600-48T Product Manual - Page 471
permit | deny (ipv6 access list), SRC-IPV6-ADDR MASK
View all D-Link DGS-6600-48T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 471 highlights
DGS-6604 m permit | deny (ipv6 access list) permit | deny (ipv6 access list) Use the permit command to add an entry to the IPv6 access-list. Use the no permit command to remove a permit entry from the IPv6 access-list. Use the deny command to add a deny entry to the IPv6 access-list. Use the no deny command to remove a deny entry from the IPv6 access-list. { permit | deny } {tcp | udp} { any | host SRC-IPV6-ADDR | SRC-IPV6-ADDR MASK } [ OPERATOR PORT ] { any | host DST-IPV6-ADDR | DST-IPV6-ADDR MASK } [ OPERATOR PORT ] [traffic-class TRAFFIC-CLASS ] [time-range PROFILE-NAME] [ priority PRIORITY ] { permit | deny } [icmpv6 | ospfv3 | nextheader NEXTHEADER] { any | host SRC-IPV6-ADDR | SRC-IPV6-ADDR MASK } { any | host DST-IPV6-ADDR | DST-IPV6-ADDR MASK } [traffic-class TRAFFIC-CLASS] [ time-range PROFILE-NAME ] [ priority PRIORITY ] no { permit | deny } {tcp | udp} { any | host SRC-IPV6-ADDR | SRC-IPV6ADDR MASK } [OPERATOR PORT ] { any | host DST-IPV6-ADDR | DST-IPV6ADDR MASK } [ OPERATOR PORT ] [traffic-class TRAFFIC-CLASS ] [ timerange ] no { permit | deny} [icmpv6 | ospfv3 |nextheader NEXTHEADER] { any | host SRC-IPV6-ADDR | SRC-IPV6-ADDR MASK} { any | host DST-IPV6-ADDR | DST-IPV6-ADDR MASK} [traffic-class TRAFFIC-CLASS ] [ time-range ] Syntax Description Any host SRC-IPV6-ADDR SRC-IPV6-ADDR MASK host DST-IPV6-ADDR DST-IPV6-ADDR MASK tcp, udp, icmpv6, ospfv3 nextheader NEXTHEADER traffic-class TRAFFICCLASS OPERATOR PORT An abbreviation for the IPv6 prefix ::/0 Specifies a specific source IPv6 address. Specifies a source IPv6 addresses by using a mask. Specifies a specific destination IPv6 address. Specifies a group of destination IPv6 addresses by using a mask. L4 protocol type of the next header in the IPv6 header. The value of the nextheader in IPv6 header. The range is from 0 to 255 (Optional) Specifies the traffic class value in IPv6 header. The acceptable range is from 0 to 255. (Optional) Compares source or destination port. OPERATOR can be lt (less than, match on a lower port number), gt (greater than, match on a greater port), eq (equal, match on a specific port). time-range The PORT argument can be the L4 TCP/UDP source or destination port. The acceptable range is from 0 to 65535 for eq operator. The acceptable range is from 0 to 65534 for gt operator. The acceptable range is from 1 to 65534 for lt operator (Optional) Specifies the name of time-period profile for activation the access-list. CLI Reference Guide 461