D-Link DGS-6600-48T Product Manual - Page 482

DGS-6604 m police police To configure traffic policing using single rate, use the police command in policymap class configuration mode. To remove traffic policing from the configuration, use the no form of this command. police BPS [BURST-NORMAL] [BURST-MAX] exceed-action ACTION [violate-action ACTION] no police BPS [BURST-NORMAL] [BURST-MAX] exceed-action ACTION [violate-action ACTION] Syntax Description BPS Average rate, in bits per second. BURST-NORMAL min: 64KB max:32G. (Optional) Normal burst size in bytes. BURST-MAX min:4KB max:16MB default:4KB. Unit is KB (Optional) Maximum burst size, in bytes. Valid values are project dependent min:4KB max:16MB default:4KB. Unit is KB "police BPS BURST-NORMAL BURST-MAX exceed-action ACTION violateaction ACTION For the above case, the explicit BURST-NORMAL BURST-MAX values are used. "police BPS BURST-MAX exceed-action ACTION violate-action ACTION For the above case, the default BURST-NORMAL and explicit BURST-MAX values are used. "police BPS exceed-action ACTION violate-action ACTION For the above case, the default BURST-NORMAL and default BURST-MAX values are used. "police BPS BURST-NORMAL exceed-action ACTION exceed-action violate-action For the above case, the explicit BURST-NORMAL and explicit BURST-MAX values are used. Specifies action to take on packets that exceed the rate limit. (Optional) Specifies action to take on packets that violate the normal and maximum burst sizes. CLI Reference Guide 472