D-Link DGS-6600-48T Product Manual - Page 498

DGS-6604 m qos aggregate-policer Syntax Description PEAK-BURST PEAK-BURST Specifies the burst size for the second token bucket in bytes. min: 4KB max: 16MB default :4KB. exceed-action Specifies action to take on packets that exceed the rate limit. violation-action (Optional) Specifies action to take on packets that violate the normal and maximum burst sizes for singe rate policing. . Specifies the action to take for those packets that did not conform to both CIR and PIR. For two rates policing. ACTION If violate-action is not specified for single rate policer, it will create a single rate two color policer. Action to take on packets. Specifies one of the following keywords: "drop-Drops the packet. "set-dscp-transmit VALUE - Sets the IP differentiated services code point (DSCP) value and transmits the packet with the new IP DSCP value. "transmit-Transmits the packet. The packet is not altered. Default Command Mode Usage Guideline Not configured For a two rate policer, the defaults for unspecified options are as follows: • exceed-action: drop. • violate-action equals exceed-action Global configuration An aggregate policer can be shared by different policy map classes and on different interfaces. It cannot be shared by different policy map. For detailed description regarding how to configure the policer, refers to the usage guideline for police and police cir command. Note: Either one of qos aggregate-policer NAME command and qos aggregatepolicer NAME cir command can be activated for the refereed traffic class. The latter command will overwrite the previous qos aggregate-policer NAME setting once the reference aggregator name are the same. CLI Reference Guide 488