D-Link DGS-6600-48T Product Manual - Page 517
redistribute (RIP), redistribute, metric, default-met
View all D-Link DGS-6600-48T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 517 highlights
DGS-6604 m redistribute (RIP) redistribute (RIP) Use redistribute to redistribute routes from one routing domain into another routing domain. Use the no form of the command to disable redistribution. redistribute PROTOCOL [metric METRIC-VALUE] no redistribute PROTOCOL Syntax Description PROTOCOL Source protocol from which routes are being redistributed. It can be one of the following keywords: bgp, connected, ospf, static. The static keyword is used to redistribute IP static routes. The connected keyword refers to routes that are established automatically by virtue of having enabled IP on an interface. metric METRICVALUE For routing protocols such as Open Shortest Path First (OSPF), these routes will be redistributed as external to the autonomous system. (Optional) Specifies metric value to be used in redistributing information. The range is 0 to 16. Regarding the metric conversion, the following is the rule. 1. If the metric is not specified, the metric for the redistributed route from other protocols to the RIP process will be determined by the value of the "defaultmetric" command. 2. If the metric is specified as 0, the metric for the redistributed route from other protocols to the RIP process will be 1. Default Command Mode Usage Guideline Disabled PROTOCOL: Not configured METRIC-VALUE: 0 Router configuration Routes, configured with the connected keyword, affected by this redistribute command are the routes not specified by the network router configuration command. Regarding the metric conversion, the following is the rule. If the metric option is not specified, the following rules are applied: 1. If the metric is not specified, or is specified as 0, the metric for the redistributed static route or connected route will be 1. 2. If the metric is not specified, the metric for the redistributed route from other protocols to RIP process will be determined by the value of the "default-metric" command. CLI Reference Guide 507