D-Link DGS-6600-48T Product Manual - Page 560

DGS-6604 m set weight set weight To specify the BGP weight for the routing table, use the set weight command in route-map configuration mode. To delete an entry, use the no form of this command. set weight NUMBER no set weight NUMBER Syntax Description NUMBER Weight value. It can be an integer ranging from 0 to 65535. Default Command Mode Usage Guideline Example Disabled Route-map configuration The implemented weight is based on the first matched autonomous system path. Weights indicated when an autonomous system path is matched override the weights assigned by global neighbor commands. In other words, the weights assigned with the set weight route-map configuration command override the weights assigned using the neighbor weight command. This example shows how to add the policy routing entry with name myPolicy and set the weight to 30 when it match the as-path access list with PATH_ACL: Switch(config)# route-map myPolicy permit 1 Switch(config-route-map)# match as-path PATH_ACL Switch(config-route-map)# set weight 30 Verify the settings by entering the show route-map command. CLI Reference Guide 550