D-Link DGS-6600-48T Product Manual - Page 584

DGS-6604 m show cpu-protect sub-interface show cpu-protect sub-interface Use this command to show the rate-limit and statistics by sub-interface. show cpu-protect sub-interface { manage | protocol | route } [UNIT-ID] Syntax Description UNIT-ID (Optional) Specify the unit id, that you want, to display the rate limit configuration and statistics by sub-interface. For the chassis system device, the unit ID is equal to a blade ID (or slot ID). Default Command Mode Usage Guideline Example none Privileged EXEC mode Show configured rate limit and drop-count of Safeguard engine of specific group. These counters are counted by the software. There is probably deviation from the hardware received if the packets are dropped before sent to CPU. The following example is a sample output of the show cpu-protect sub-interface manage command. The configured rate is 300 packets per second, and there exists one IO-card on slot 3. Switch# show cpu-protect sub-interface manage Sub-Interface: manage Pps : 300 Slot Total Drop 1(CM-card) 50 0 3 50 0 Switch# The following is a sample output of the show cpu-protect sub-interface protocol command. The Pps is "N/A" which means no rate-limit is applied to route sub-interface. Switch# show cpu-protect sub-interface protocol Sub-Interface: protocol Pps : N/A Slot Total Drop 1(CM-card) 0 0 3 0 0 Switch# CLI Reference Guide 574