D-Link DGS-6600-48T Product Manual - Page 630

DGS-6604 m show ip dvmrp prune show ip dvmrp prune Use this command to display DVMRP upstream prune state information. show ip dvmrp prune Syntax None Default None Command Mode User EXEC or any configuration mode Usage Guideline Display DVMRP upstream Prune state information. Example This example shows how to displays prune information. DGS-6600:15#show ip dvmrp prune Flags: P=Pruned,D=Holddown,N=NegMFC Source Group State ExpTime Prune/Graft Network Address ReTransmit-Time 10.0.7.101/32 239.255.255.250 P.. 0DT1H45M44S Off 10.0.7.131/32 239.255.255.250 P.. 0DT1H47M30S Off 10.1.52.99/32 229.55.150.208 P.N 0DT1H44M36S 0DT0H3M50S Total Entries: 3 Display Field Descriptions Description of significant display fields. Display Field Source Network Group Address State Description The address of the source IP address or source network. The IP group address. P: The upstream state is in Prune state. D: The entry is in Hold-Down state. In this state, a negative multicast forwarding cache (ip mroute) entry will be added. ExpTime Prune/Graft ReTransmit Time N: Negative Multicast forwarding cache (ip mroute) is installed. The amount of time remaining before this prune will expire. The ramaining time before retransmitting a Prune or Graft. When "P" flag is set in the "State" field, this timer would represent the Prune retransmit timer, otherwise, it would represent the Graft retransmit timer. CLI Reference Guide 620