D-Link DGS-6600-48T Product Manual - Page 637

DGS-6604 m Display Field Descriptions show ip igmp snooping The following table shows the field information for the above example. Display Field Querier state Querier Router Immediate Leave Host Compatibility Mode Parameter Enabled Disabled Active Non-active Enable Disable IGMPv1 IGMPv2 Description IGMP Snooping querier is enabled. IGMP Snooping querier is disabled. This VLAN interface of the switch works as an IGMP snooping querier. This VLAN interface does not function as an IGMP snooping querier. This field can be disregarded when the IGMP snooping querier state is disabled. IGMP Snooping immediate leave response function is enabled which means the member port of the VLAN interface will receive any IGMP leave message from a port, the system will immediately remove the port from the multicast group membership. IGMP Snooping immediate leave response function is disabled which means the member port of the VLAN interface will receive the IGMP leave message, the system will not remove the port from the multicast group membership, instead the system will follow IGMP interaction process to confirm the multicast membership. The current compatibility state of this interface. This state is dependent on the version of general queries received from the interface. IGMPv3 is the default value. If any lower version is received, the version will go back to the lowest version for backward compatibility. Timer State IGMPv3 - [n]DT[n]H[n]M[n]S The timer stops counting down. Timer starts to count down, and its initial count is set to the value got from the Older Version Querier Present Timeout in the IGMP control packet. CLI Reference Guide 627