D-Link DGS-6600-48T Product Manual - Page 640

DGS-6604 m Display Field Descriptions show ip igmp snooping group The following table shows the display field information for the example on the previous page. Display Field IGMP version Interface Uptime Expires Group mode Last reporter Forward Description The version of IGMP. The version of IGMP that the multicast group has reported. Interface ID of VLAN in which the multicast IP address is reported. The time elapsed since the entry has been created in the format of [n]DT[n]H[n]M[n]S The time that the entry will be removed if there is no refresh on the entry in the format of [n]DT[n]H[n]M[n]S. "never" indicates that the entry will not be time out, because a local receiver is on the router for this entry. "stopped" indicates that the time-out of this entry is not determined by this expire timer. If the router is set to Include mode for a group, then the whole group entry times out after the last source entry has timed out (unless the mode is changed to Exclude mode before it times out). Include or Exclude: The group mode is based on the type of membership reports that are received on the interface for the group. static: If this group is configured statically on the port (or port-channel) interface. dynamic: If this port (or port-channel) interface receives a host's IGMP membership report for the group. Last host to report being a member of the multicast group. Status of whether the router is forwarding multicast traffic due to this entry. CLI Reference Guide 630