D-Link DGS-6600-48T Product Manual - Page 676

DGS-6604 m show ip pim neighbor show ip pim neighbor Use this command to show the PIM-SM neighbor information. show ip pim neighbor [INTERFACE-ID] Syntax Description INTERFACE-ID (Optional) Specifies the interface to display the PIM-SM neighbor information for. If INTERFACE-ID is not specified, the information on all interfaces will be displayed. Default Command Mode Usage Guideline Example None User EXEC or any configuration mode Use this command to determine which routers on the LAN are configured for PIM. The following example displays the PIM neighbor information for all interfaces. Switch# show ip pim neighbor Mode: B - Bidir Capable, DR - Designated Router, N - Default DR Priority, S - State Refresh Capable Neighbor Interface Uptime/Expires Ver DR Pri/Mode 10.10.0.9 vlan1 0DT0H55M33S/0DT0H1M44S v2 1 / 10.10.0.136 vlan1 0DT0H55M20S/0DT0H1M25S v2 1 / 10.10.0.172 vlan1 0DT0H55M33S/0DT0H1M32S v2 1 / DR 192.168.0.100 vlan2 0DT0H55M30S/0DT0H1M20S v2 N Total Entries: 4 Switch# Display Field Descriptions The following table describes the ip pim neighbor fields. Field DR Pri/Mode Descriptions Priority and mode of the designated router (DR). Priority: "N" indicates the neighbor does not support DR Priority Option in the Hello message otherwise the DR priority value will be displayed. Mode: Describes the capability of the neighbor. The meaning of codes is as follows: CLI Reference Guide 666