D-Link DGS-6600-48T Product Manual - Page 682

DGS-6604 m show ip rip database show ip rip database To display summary address entries in the Routing Information Protocol (RIP) routing database entries, use the show ip rip database command. show ip rip database Syntax None Default None Command Mode User EXEC or any configuration mode Usage Guideline show ip rip database will display route information, such as: network, next hop, metric, from, if, time. Examples The following output shows a summary address. Switch# Show ip rip database Codes: R - RIP, Rc - RIP connected, Rs - RIP static, K - Kernel, C - Connected, S - Static, O - OSPF, I - IS-IS, B - BGP Network Next Hop Metric From If Time Rc 10.0.0.0/8 1 vlan1 Rc 20.0.0.0/8 1 vlan2 R 30.0.0.0/8 20.33.24.1 2 20.33.24.1 vlan2 0DT0H2M44S 40.33.24.8 5 40.33.24.2 vlan3 0DT0H2M30S Total Entries: 3 entries, 4 routes Switch# Display Field Descriptions Description of significant display fields. Display Field Rc 10.0.0.0/8 Rc 20.0.0.0/8 R 30.0.0.0/8 via ,etc. Description Directly connected entry to vlan1. Directly connected entry to vlan2. The destination 30.0.0.0/8 is learned via RIP. There are two sources advertising it. One is 20.33.24.1 via vlan2 and it was updated 16 seconds ago. The other source is 40.33.24.8 via vlan3, and it was updated 30 seconds ago. CLI Reference Guide 672