D-Link DGS-6600-48T Product Manual - Page 7

- Note: Not all configuration modes are listed in the above figure. For example, in global configuration mode, enter "router ospf" to enter OSPF router configuration mode The following table briefly lists the available command modes. Only the basic command modes and some of the sub-configuration modes are enumerated. The basic command modes and basic sub-configuration modes are further described in the following chapters. Descriptions for the rest of the sub-configuration modes are not provided in this section. For more information on the additional sub-configuration modes, the user should refer to the chapters relating to these functions. The available command modes and privilege levels are described below: Command Mode & Privilege Level Purpose User EXEC mode at Basic User level For checking basic system settings, allowing users to change the local terminal session settings, and verifying basic network connectivity. Checking security related settings is not allowed at this command mode and privilege level. User EXEC mode at Advanced User level This level has almost the same access rights as user EXEC mode at basic user level, except that a user in this mode and at this level can enter privileged EXEC mode by entering the enable command. Privileged EXEC mode at Power User level For changing both local and global terminal settings, monitoring, and performing certain system administration tasks. The system administration tasks that can be performed at this level includes the clearing of system configuration settings, except for any security related information, such as user accounts, SNMP account settings etc. Privileged EXEC mode at Administrator level This level is identical to privileged EXEC mode at power user level, except that a user at the administrator level can monitor and clear security related settings. Global Configuration Mode at Power User level For applying global settings, except for security related settings, on the entire Switch. In addition to applying global settings on the entire Switch, the user can access other sub-configuration modes from global configuration mode. Global Configuration Mode at Administrator level For applying global settings on the entire Switch. In addition to applying global settings on the entire Switch, the user can access other sub-configuration modes from global configuration mode. Interface Configuration Mode at Power User level For applying interface related settings. viii