D-Link DGS-6600-48T Product Manual - Page 704

DGS-6604 m show ipv6 ospf interface show ipv6 ospf interface To display OSPF-related interface information, use the show ipv6 ospf interface command. show ipv6 ospf interface [IFNAME] Syntax Description IFNAME (Optional) Interface type and number. If no option is specified, applying the command displays the entire IPv6 OSPF process. Default Command Mode Usage Guideline Example None User EXEC None. show ipv6 ospf interface Standard Output Example: The following is sample output from the show ipv6 ospf interface command. Switch > enable Switch # show ipv6 ospf interface The result after executing this command is as follows. vlan2 is up, line protocol is up Interface ID 1026 IPv6 Prefixes fe80::a01:2ff:fe36:2/64 (Link-Local Address) 3ffe:4::30/64 OSPFv3 Process (null), Area 0.0.0.1 (active) MTU 1500, Instance ID 0 Router ID 10.76.37.30, Network Type BROADCAST, Cost: 1 (default) Transmit Delay is 1 sec, State BDR, Priority 1 Designated Router (ID) 10.76.37.3 Interface Address fe80::219:5bff:fef5:2cc1 Backup Designated Router (ID) 10.76.37.30 Interface Address fe80::a01:2ff:fe36:2 Timer intervals configured, Hello 10, Dead 40, Retransmit 5 Hello due in 0DT0H0M5S Neighbor Count is 1, Adjacent neighbor count is 1 Hello received 48 sent 46, DD received 5 sent 3 LS-Req received 1 sent 1, LS-Upd received 11 sent 10 LS-Ack received 8 sent 6, Discarded 00 CLI Reference Guide 694