D-Link DGS-6600-48T Product Manual - Page 706

DGS-6604 m show ipv6 ospf route show ipv6 ospf route To display the current contents of the IPv6 OSPF routing table, use the show ipv6 ospf route command. show ipv6 ospf [PROCESS-ID] route Syntax Description PROCESS-ID (Optional) Internally used identification parameter for an IPv6 OSPF routing process. It is locally assigned and can be any positive integer. A unique value is assigned for each IPv6 OSPF routing process. Default Command Mode Usage Guideline Example None User EXEC The information displayed by the show ipv6 ospf route command is useful in debugging OSPF routing operations. If PROCESS-ID is not specified, the command will display all IPv6 OSPF processes. The following is sample output from the show ipv6 ospf route command. Switch > enable Switch # show ipv6 ospf route OSPFv3 Process (null) Codes: C - connected, D - Discard, O - OSPF, IA - OSPF inter area E1 - OSPF external type 1, E2 - OSPF external type 2 Destination Metric Next-hop O 3ffe:1::/64 11 via fe80::219:5bff:fef5:2cc1, vlan2, TransitArea 0.0.0.1 O 3ffe:2::/64 1 directly connected, vlan2, TransitArea 0.0.0.1 O 3ffe:2::10/128 1 via fe80::219:5bff:fef5:2cc1, vlan2, TransitArea 0.0.0.1 C 3ffe:3::/64 1 directly connected, vlan3, Area 0.0.0.3 C 3ffe:4::/64 1 directly connected, vlan2, TransitArea 0.0.0.1 C 3ffe:4::30/128 0 directly connected, vlan2, TransitArea 0.0.0.1 Total Entries: 6 entries, 6 routes CLI Reference Guide 696