D-Link DGS-6600-48T Product Manual - Page 767
show vlan, show vlan [subnet|mac]
View all D-Link DGS-6600-48T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 767 highlights
DGS-6604 m show vlan show vlan Use the show VLAN command to display the parameters for all configured VLANs or one VLAN (if the VLAN id or name is specified) on the switch. Use the command show vlan subnet-base or show vlan mac-base to display a subnet-based VLAN or MAC-based VLAN respectively. Use the command show vlan [subnet|mac] to display a subnet-based VLAN or a MAC-based VLAN respectively. show vlan [ VLAN-ID [, | -] interface [ INTERFACE-ID dynamic | detail] show vlan [ subnet-base | mac-base ] Syntax Description VLAN-ID (Optional) Display information about a single VLAN identified by VLAN id number. The VLAN id range is 1 to 4094. Separate non-consecutive VLAN-IDs with a comma; use a hyphen to designate a range of VLAN-ID. interface (Optional) Displays the interface port's PVID, ingress checking, acceptable frame type information. INTERFACE-ID Specifies the port to display. , (Optional) Specifies a series of ports, or separate a range of ports from a previous range. No space before and after the comma. - (Optional) Specifies a range of ports. No space before and after the hyphen. [ detail | dynamic] (Optional) Specifies what kind of information to be displayed. The optional keywords are: detail: display detailed information including static and dynamic information about the specified VLAN(s) dynamic: display dynamic membership which is learned by GVRP for the specified VLAN(s). subnet-base mac-base If neither detail nor dynamic is specified, only the static configuration will be shown. (Optional) display subnet-based VLAN related configuration. (Optional) display mac-based VLAN related configuration. Default Command Mode Usage Guideline None User EXEC or any configuration mode Use the show vlan command to display the current VLAN status. Show the VLAN list table using show vlan command. Show a specific VLAN entry using show vlan VLAN-ID. Use show vlan interface command to show port-oriented VLAN information, such as, port PVID, ingress checking, and acceptable frame type information. CLI Reference Guide 757