D-Link DGS-6600-48T Product Manual - Page 860

DGS-6604 m spanning-tree mst configuration spanning-tree mst configuration To enter MST-configuration submode, use the spanning-tree mst configuration command. To return to the default settings, use the no form of this command. spanning-tree mst configuration no spanning-tree mst configuration Syntax None Default The default value for the MST configuration is the default value for all its parameters: • No VLANs are mapped to any MST instance (all VLANs are mapped to the CIST instance). • The region name is the Bridge MAC Address. Command Mode Usage Guideline Global configuration The MST configuration consists of three main parameters: • Instance VLAN mapping-See the instance command • Region name-See the name (MST configuration submode) command • Configuration revision number-See the revision command .Examples The exit command is used to leave MST configuration submode. Changing an MST-configuration submode parameter can cause connectivity loss. To reduce service disruptions, when entering the MST-configuration submode, make changes first to a copy of the current MST configuration before applying them at the submode. This example shows how to enter MST-configuration submode: Switch(config)# spanning-tree mst configuration Switch(config-mst)# This example shows how to reset the MST configuration to the default settings: Switch(config)# no spanning-tree mst configuration Switch(config)# CLI Reference Guide 850