D-Link DGS-6600-48T Product Manual - Page 862

DGS-6604 m spanning-tree mst priority spanning-tree mst priority Use this command to configure the bridge priority value for the selected MSTP instance. Use the no form of the command to return the setting to the default setting. spanning-tree mst INSTANCE-ID priority PRIORITY no spanning-tree mst INSTANCE-ID priority Syntax Description INSTANCE-ID Specifies the MSTP instance identifier. Valid values are from 0 to 63. The number of supported MSTP instances is project dependent. Instance 0 represents the default instance, CIST. PRIORITY Specifies the bridge priority. The priority value must be divisible by 4096 and the range is from 0 to 61440. Default Command Mode Usage Guideline Example PRIORITY: 32768 Global configuration The number of supported MSTP instances is project dependent. This priority has same definition as the "spanning-tree priority" on page 854 within the STP command set, but it can specify different priorities for each distinct MSTP instance. This example shows how to configure bridge priority for the MSTP instance 2. Switch# configure terminal Switch(config)#spanning-tree mst 2 priority 0 Switch(config)# end Verify the settings by entering the show spanning-tree mst command. CLI Reference Guide 852