D-Link DGS-6600-48T Product Manual - Page 87

DGS-6604 bgp log-neighbor-changes bgp log-neighbor-changes Use the bgp log-neighbor-changes command to enable logging of BGP neighbor resets. Use no bgp log-neighbor-changes to disable the logging. bgp log-neighbor-changes no bgp log-neighbor-changes Syntax None Default Disabled. Command Mode Usage Guideline Router configuration. This command enables logging of both BGP resets and alternating status changes to use for toubleshooting purposes . Unexpected neighbor resets might indicate high error rates or high packet loss in the network and should be investigated. The neighbor status change messages are not tracked if the bgp log-neighborchanges command is not enabled. The exception to this is for a reset reason, which is always available as output of the show ip bgp neighbors and show bgp ipv6 neighbors commands. Example The logs for BGP neighbor changes will display on the console. This example shows how to enable logging of BGP neighbor changes for autonomous system 65534: Switch(config)# router bgp 65534 Switch(config-router)# bgp log-neighbor-changes Use the show logging buffer command to display the log for the BGP neighbor changes. CLI Reference Guide 77